Need any help or advice?
+44 (0)1782 454499
USED IN THIS PROJECT
Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.
The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.
COMPONENT MATERIALS
TOOLS & EQUIPMENT
PATTERN MAKING MATERIALS
MOULD MAKING MATERIALS
CUSTOMER GALLERY
Morris Minor Intake Scoop
Having never made anything like this before in composite materials, Malk watched our Easy Composites tutorials on pattern and mould making.
He found these very helpful and they gave him the knowledge to tackle his own project to make a new air intake scoop for his race retired Morris Minor.
The images show the process of the build that Malk went through, showing the design stage, through to completion. There is also a photograph of the car in action on the track with the original scoop.
Malk said that as he has no access to CAD design so did it 'old school' by drawing the pattern out on paper!
ABOUT MALK MOTLER - DIY'ER
Having retired his Morris Minor Pick-up from racing, Malk decided to put the car back on the road and wanted to make a new air intake scoop that was a more practical vision wise to use on the road.
USED IN THIS PROJECT
Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.
The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.
COMPONENT MATERIALS
TOOLS & EQUIPMENT
PATTERN MAKING MATERIALS
MOULD MAKING MATERIALS
ABOUT MALK MOTLER - DIY'ER
Having retired his Morris Minor Pick-up from racing, Malk decided to put the car back on the road and wanted to make a new air intake scoop that was a more practical vision wise to use on the road.
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.