Downloads (3)

Safety Data Sheet (SDS)280 KB
Dutch Safety Datasheet281 KB
Technical Datasheet (TDS)333 KB

Specification

Product Data
ColourWhite
TypeOpaque
FormatPaste
BrandWest & Senior
Compatible With
Compatible WithPolyesterYes
General Properties
Gross Weight0.625kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

White Polyester Pigment

Manufactured by West & Senior and specially formulated for polyester resin, our white pigment paste can be used to add solid white colour to any polyester/vinylester resin. Triple milled for maximum colour intensity and easy dispersion into polyester resin.

Lighter colours like this white pigment are typically added at 5-10%. Available to buy online in 500g or 1kg packs.


PRODUCT VERSIONS

Pack Size

AVAILABILITY:8 in stock available for immediate shipping


PRICE
£7.95ex. VAT
(£15.90 /KG)
8 in stock available for immediate shipping
QTY
PACKS
PACKS

Trade discounts

0-12+
£7.95£6.25
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Very high quality West & Senior WHITE pigment for polyester resin.

Use this pigment to add vivid colour to any polyester or vinylester laminating resin, casting resin or gelcoat. Suitable for moulds, parts and castings.

All West & Senior pigment dispersions are made the very highest quality with pigments triple milled to reduce them to the finest particle size. Smaller particles means more vibrant colours from less pigment, improving the appearance of pigmented parts whilst minimising the performance reduction of the resin caused by pigmentation.

Typical Uses

Use to add solid colour to polyester laminating resin, polyester gelcoat (for parts and moulds) and polyester casting or potting resins. A pigment ratio of 5-10% should be sufficient to add solid opaque colour in most applications.

Advantages

Pigment dispersions (pastes) should always be used when pigmenting polyester resins and gelcoats rather than pigment powder because the rigorous milling and mixing process during manufacture ensures that the tiny pigment particles are fully dispersed into a small amount of carrier polyester, getting the very most from their colour.

When a dispersion is then added to the bulk of the polyester resin it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps).

Because the dispersion is actually a mix of resin and pigment already, it is essential that the correct dispersion type is used to pigment each specific resin type. For example, polyester resins and gelcoats should only ever be pigmented using polyester dispersion pigment.

Trade discounts

0-12+
£7.95£6.25
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Very high quality West & Senior WHITE pigment for polyester resin.

Use this pigment to add vivid colour to any polyester or vinylester laminating resin, casting resin or gelcoat. Suitable for moulds, parts and castings.

All West & Senior pigment dispersions are made the very highest quality with pigments triple milled to reduce them to the finest particle size. Smaller particles means more vibrant colours from less pigment, improving the appearance of pigmented parts whilst minimising the performance reduction of the resin caused by pigmentation.

Typical Uses

Use to add solid colour to polyester laminating resin, polyester gelcoat (for parts and moulds) and polyester casting or potting resins. A pigment ratio of 5-10% should be sufficient to add solid opaque colour in most applications.

Advantages

Pigment dispersions (pastes) should always be used when pigmenting polyester resins and gelcoats rather than pigment powder because the rigorous milling and mixing process during manufacture ensures that the tiny pigment particles are fully dispersed into a small amount of carrier polyester, getting the very most from their colour.

When a dispersion is then added to the bulk of the polyester resin it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps).

Because the dispersion is actually a mix of resin and pigment already, it is essential that the correct dispersion type is used to pigment each specific resin type. For example, polyester resins and gelcoats should only ever be pigmented using polyester dispersion pigment.

Downloads (3)

Safety Data Sheet (SDS)280 KB
Dutch Safety Datasheet281 KB
Technical Datasheet (TDS)333 KB

Specification

Product Data
ColourWhite
TypeOpaque
FormatPaste
BrandWest & Senior
Compatible With
Compatible WithPolyesterYes
General Properties
Gross Weight0.625kg
Can’t find the answer you’re looking for?Ask our technical team a question.
This pigment is part of West and Senior's FastCol colour range which is a range of basic colours without RAL numbers associated with them. 

The quantity of resin used in the pigment dispersions is very small and as such when the pigment is mixed into another resin, the additional amount of resin from the pigment is very small and in practical terms insignificant. As such you do not normally need to account for it within the mixing ratio calculations.

No, unfortunately you cannot use a pigment from one resin type with another resin type. You must use the correct pigment for the resin type you are using - eg a PU resin needs a PU pigment, a polyester resin needs a Polyester pigment and an epoxy resin needs an epoxy pigment.

This is because the pigment dispersions are a blend of pigment powders AND a small amount of base resin. Mixing the wrong pigment with a resin system may inhibit the resin cure and damage the end product

Yes, you can use the pigments in a resin infusion process, however if you are not using a gelcoat you will still get the colour from the fibre showing where it contacts the surface, with glass fabric the effect is diminished as the fibre is clear, but with densely coloured fibre like carbon it may affect the pigment. 

If you need a very solid colour for epoxy infusion I would advise using Polyester Pigment in the GC50 Epoxy Compatible Gelcoat.

When using a pigment paste, it is best practice to mix the paste into the resin part of the mixture. We recommend doing this before adding the catalyst/hardener as it means you have as much time as you need to get a good even colour mixture without having to worry about reduced pot life.

The pigments used in this pigment dispersion will be excellent in terms of light fastness and weathering characteristics. If you are not already aware, pigments are graded for these properties on a blue wool scale, with 7-8 being the best. We tend to only source such grades for our dispersions with such high quality. However, the base resin system you are using these pigments with may be vulnerable to UV yellowing itself.

Our polyester pigments can also be used to pigment vinylester resins.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for White Polyester Pigment

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.