Need any help or advice?+44 (0)1782 454499
Pultruded carbon fibre tubes are manufactured using the pultrusion process whereby carbon fibre tow is pulled through a resin bath into a heated die which forms and cures the profile. This continuous drawn process can only produce tubes with all of the fibres aligned lengthways down the tube, resulting in tubes that are as strong as possible longitudinally but more vulnerable to crushing or splitting compared to roll-wrapped tubes, which have at least some fibre aligned in the 'hoop' direction.
The pultrusion process is better suited to smaller diameter tubes and our range extends from the incredibly small 0.5mm OD tube up to a 12mm OD tube. For tube diameters where you have the choice between a pultruded or roll wrapped tube, pultrusion is best for applications where you need the maximum possible stiffness down the length of the tube and you are not too worried about needing resistance to crush, burst or twist.
All our pultruded carbon fibre tubes are manufactured using high strength carbon fibre with an epoxy resin matrix for maximum performance, durability and accuracy. They are suitable for a wide range of applications including UAVs, quad-copters, aero-modelling, automation, leisure equipment, motor-sport and much more.
Pultruded carbon fibre tubes are manufactured using the pultrusion process whereby
All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.