Need any help or advice?
+44 (0)1782 454499
Downloads (1)
 | Technical DataSheet (TDS) |  138 KB |
Specification
Weight and Dimensions
| Length | 1000 | mm |
|---|---|---|
| Wall Thickness | 1 | mm |
| Outside Diameter (OD) | 10 | mm |
| Inside Diameter (ID) | 8 | mm |
Product Data
| Colour | Black | |
|---|---|---|
| Resin Matrix | Epoxy | |
| Construction | Pultrusion | |
| Appearance | UD (Matt) |
Fabric Specification
| Fibre Orientation | Unidirectional |
|---|
Mechanical Properties
| Tensile Strength (Lengthways) | 400 - 500 | MPa |
|---|---|---|
| Tensile Modulus (lengthways) | 28-40 | GPa |
| Tg Onset (DMA) | 80 | °C |
| ID Tolerance (mm) | 0.25 | mm |
| OD Tolerance (mm) | 0.25 | mm |
General Properties
| Gross Weight | 0.046 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
10mm (8mm) Pultruded Carbon Fibre Tube
- CFPTUBE-10-8-1
- No reviews
High strength pultruded carbon fibre tube with a 10mm OD and 8mm ID (1mm wall thickness). This precision made carbon fibre tube is suitable for a wide range of applications including radio controlled models, electronics, robotics and similar. The tube is manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.
Available in 1m and 2m lengths.
PRODUCT VERSIONS
Length
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
| 0-4 | 5-19 | 20+ |
|---|---|---|
| £10.95 | £9.20 | £7.70 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Pultruded carbon fibre round tube manufactured from 100% unidirectional carbon fibre.
The tube has an outer diameter (OD) of 10mm and a wall thickness of 1mm leaving an inner diameter (ID) of 8mm.
Typical Uses
This 1mm thick medium diameter 10mm tube is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.
Pultrusion Explained
Pultruded tubes are the most commonly used type of carbon fibre tube. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.
Pultruded tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.
The pultrusion process allows incredible tiny diameter tubes to be produced (as small as 0.5mm OD).
How to Buy
Our pultruded tubes are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Further Information
How to Cut and Shape
This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Trade discounts
| 0-4 | 5-19 | 20+ |
|---|---|---|
| £10.95 | £9.20 | £7.70 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Pultruded carbon fibre round tube manufactured from 100% unidirectional carbon fibre.
The tube has an outer diameter (OD) of 10mm and a wall thickness of 1mm leaving an inner diameter (ID) of 8mm.
Typical Uses
This 1mm thick medium diameter 10mm tube is ideally suited for use in radio controlled (RC) aircraft, helicopters, U.A.V's and other models but would be equally suited to other precision applications like robotics and automation.
Pultrusion Explained
Pultruded tubes are the most commonly used type of carbon fibre tube. Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case tube) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.
Pultruded tubes feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. For applications where none-uniform forces are likely to be encountered, including crushing forces, roll wrapped carbon fibre tubes should be considered as an alternative.
The pultrusion process allows incredible tiny diameter tubes to be produced (as small as 0.5mm OD).
How to Buy
Our pultruded tubes are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Discounts are available for larger quantities and wholesale/trade purchases; please contact us for details.
Further Information
How to Cut and Shape
This carbon fibre tube can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre tube can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Downloads (1)
| Technical DataSheet (TDS) | 138 KB |
Specification
Weight and Dimensions
| Length | 1000 | mm |
|---|---|---|
| Wall Thickness | 1 | mm |
| Outside Diameter (OD) | 10 | mm |
| Inside Diameter (ID) | 8 | mm |
Product Data
| Colour | Black | |
|---|---|---|
| Resin Matrix | Epoxy | |
| Construction | Pultrusion | |
| Appearance | UD (Matt) |
Fabric Specification
| Fibre Orientation | Unidirectional |
|---|
Mechanical Properties
| Tensile Strength (Lengthways) | 400 - 500 | MPa |
|---|---|---|
| Tensile Modulus (lengthways) | 28-40 | GPa |
| Tg Onset (DMA) | 80 | °C |
| ID Tolerance (mm) | 0.25 | mm |
| OD Tolerance (mm) | 0.25 | mm |
General Properties
| Gross Weight | 0.046 | kg |
|---|
Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
No these pultrusions are not magnetic.
No, this pultrusion is manufactured from standard modulus fibres.
We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts
Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.
Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.
In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.
The HDT of these pultrusions is 80 °C.
Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.
ASK YOUR OWN QUESTION
Customer Product Reviews for 10mm (8mm) Pultruded Carbon Fibre Tube
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.