Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

PATTERN MAKING MATERIALS
Soft Filleting and Filling Wax 330g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 330g£6.17 /block

Uni-Mould Complete Mould Making Kit Regular (0.7sqm) Thumbnail
SK-UM-R-KITUni-Mould Complete Mould Making Kit Regular (0.7sqm)£76.95 /kit

Total £0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll£53.27 /roll

Total £0.00
RESIN & PIGMENTS
Pattern-Coat Primer 1kg Thumbnail
PCP-1Pattern-Coat Primer 1kg£18.25 /pack

Pattern-Coat Hi-Gloss 1kg Thumbnail
PCG-1Pattern-Coat Hi-Gloss 1kg£18.50 /pack

Total £0.00
ANCILLARIES
PVA Mould Release Agent 200ml Thumbnail
PVA-02PVA Mould Release Agent 200ml£3.47 /pack

Total £0.00

CUSTOMER GALLERY

Air Scoop - Audi TTRS intake system

Stefan made this Air Scoop for an Audi TTRS intake system using materials from Easy Composites including the Uni-Mould System and XPREG prepreg carbon fibre.

Take a look at some of Stefan's other projects in the gallery.

Thanks for sharing your work with us Stefan!


ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Facebookwww.facebook.com/straightforward

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

PATTERN MAKING MATERIALS
Soft Filleting and Filling Wax 330g Thumbnail
FILLWAX-330Soft Filleting and Filling Wax 330g£6.17 /block

Uni-Mould Complete Mould Making Kit Regular (0.7sqm) Thumbnail
SK-UM-R-KITUni-Mould Complete Mould Making Kit Regular (0.7sqm)£76.95 /kit

Total £0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll£53.27 /roll

Total £0.00
RESIN & PIGMENTS
Pattern-Coat Primer 1kg Thumbnail
PCP-1Pattern-Coat Primer 1kg£18.25 /pack

Pattern-Coat Hi-Gloss 1kg Thumbnail
PCG-1Pattern-Coat Hi-Gloss 1kg£18.50 /pack

Total £0.00
ANCILLARIES
PVA Mould Release Agent 200ml Thumbnail
PVA-02PVA Mould Release Agent 200ml£3.47 /pack

Total £0.00

ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Instagram@straight_forwrd_rt
Facebookwww.facebook.com/straightforward

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.

Instagram@straight_forwrd_rt