Need any help or advice?
+44 (0)1782 454499
Specification
Weight and Dimensions
| Diameter | 50 | mm |
|---|---|---|
| Thread Size | 1/4" | BSPT (R) |
Product Data
| Thread Entry | Bottom Entry |
|---|
General Properties
| Gross Weight | 0.153 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Glycerine-Filled Vacuum Gauge, 50mm, 1/4" BSP
- VG2-GL-50-B
- No reviews
High quality, glycerine filled vacuum gauge with 50mm suitable for reading the vacuum level on vacuum pumps, bags and equipment. Being glycerine filled makes the gauge more durable and less susceptible to accidental damage.
Male 1/4" BSP thread, 50mm dual-scale dial. Available in bottom entry or rear entry versions.
PRODUCT VERSIONS
Version
AVAILABILITY:More than 20 availablefor immediate shipping
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Manufactured to very high standards, this gauge is durable, accurate and easy to read. Being glycerine filled, the gauge is much more resilient to damage during transport and daily use where accidental knocks can uncalibrate a dry gauge.
The gauge is available in bottom entry or rear entry versions, both featuring a male 1/4 BSP thread making it easy to connect in the correct orientation to a wide range vacuum equipment.
Further Information
Instructions for Use
Please note that the glycerine in the gauge is not intended to fill the dial of the gauge to the very top. A small space at the top of the gauge needs to remain unfilled in order to allow internal pressure to be balanced with atmospheric pressure (see below).
VG2 includes a rubber seal which (providing the gauge will always be used in an upright position) should be permanently pierced in order to balance the pressure inside the gauge with changes in atmospheric pressure.
If using the gauge from new, install the gauge into your equipment in the correct orientation (with the fitting at the bottom) and then break the rubber seal at the top of the gauge using a sharp object.
Manufactured to very high standards, this gauge is durable, accurate and easy to read. Being glycerine filled, the gauge is much more resilient to damage during transport and daily use where accidental knocks can uncalibrate a dry gauge.
The gauge is available in bottom entry or rear entry versions, both featuring a male 1/4 BSP thread making it easy to connect in the correct orientation to a wide range vacuum equipment.
Further Information
Instructions for Use
Please note that the glycerine in the gauge is not intended to fill the dial of the gauge to the very top. A small space at the top of the gauge needs to remain unfilled in order to allow internal pressure to be balanced with atmospheric pressure (see below).
VG2 includes a rubber seal which (providing the gauge will always be used in an upright position) should be permanently pierced in order to balance the pressure inside the gauge with changes in atmospheric pressure.
If using the gauge from new, install the gauge into your equipment in the correct orientation (with the fitting at the bottom) and then break the rubber seal at the top of the gauge using a sharp object.
Specification
Weight and Dimensions
| Diameter | 50 | mm |
|---|---|---|
| Thread Size | 1/4" | BSPT (R) |
Product Data
| Thread Entry | Bottom Entry |
|---|
General Properties
| Gross Weight | 0.153 | kg |
|---|
The thread on the glycerine filled vacuum gauge is BSPP.
This gauge does not come with a calibration certificate.
ASK YOUR OWN QUESTION
Customer Product Reviews for Glycerine-Filled Vacuum Gauge, 50mm, 1/4" BSP
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.