Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

RESIN & PIGMENTS
XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit£26.50 /kit

Total £0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll£73.16 /roll

Total £0.00

CUSTOMER GALLERY

Toyota GT86 Intake Pipe

Stefan made this Intake Pipe for an Toyota GT86 intake system from a 3D printed pattern using materials from Easy Composites including XPREG prepreg carbon fibre.

Take a look at some of Stefan's other projects in the gallery.

Thanks for sharing your work with us Stefan!


ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Facebookwww.facebook.com/straightforward

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

RESIN & PIGMENTS
XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit£26.50 /kit

Total £0.00
REINFORCEMENTS
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll Thumbnail
XC110-C331T2-210(1250)-1XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 1m Roll£73.16 /roll

Total £0.00

ABOUT STRAIGHT FORWARD RACING TECHNOLOGIES

Straight Forward Racing Technologies

Stefan first got into working with composites by wrapping some interior car parts in carbon fibre, He then discovered Easy Composites video tutorials and embarked on his first prepreg project.

The first project was a little air scoop for an Audi TTRS intake system. He followed this project up by making an entire air box system for the same car, then another inlet pipe and the last big project was a wing for the new Toyota Supra.

You can see more of Stefan's projects in the gallery.


CONTACT INFORMATION
Instagram@straight_forwrd_rt
Facebookwww.facebook.com/straightforward

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.

Instagram@straight_forwrd_rt