Need any help or advice?
+44 (0)1782 454499
Specification
General Properties
| Gross Weight | 0.009 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Resin Infusion Silicone Connector
- RI-SCV
- 5/5 Average rating
Reusable silicone connector designed specifically for the resin infusion process. The connector sits inside the vacuum bag and accepts a 9mm OD vacuum hose and has a slot underneath to feed into the resin infusion spiral.
Sold individually. Volume discounts apply.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
| 0-9 | 10-49 | 50+ |
|---|---|---|
| £3.25 | £2.70 | £2.00 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Re-usable silicone connector designed specifically for the resin infusion process. The connector sits inside the vacuum bag and accepts the vacuum hose or resin infusion spiral.
Sold individually
Sold individually. Picture shows connector from above and below for illustration purposes only.
Further Information
For Resin Feed and Vacuum Line Connections
On the underside of the connector is a 4-way channel that ensures a good air channel for the vacuum line into the project or alternatively a good flow of resin into the infusion spiral.
This new design replaces our old resin infusion connectors where a different connector was used for the resin line and the vacuum line whilst at the same time improving the performance of the connector for both these uses.
The silicone connector is designed to accept a 6mm OD hose such as our 6mm ID budget vacuum hose. The larger channel on the underside of the connector is designed to accept our 6mm OD Resin Infusion Spiral.
Lifespan
These infusion connectors are re-usable and can be removed from the cured laminate and resin once and infusion is complete and used again. When used with epoxy resin the connectors will have a finite lifespan and over time the epoxy will start to perish the connectors whereupon they will need replacing. For this reason we offer excellent volume discounts for connectors purchased as 10 or more or even 50 or more at a time.
Polyester and vinylester resins do not perish the connector in the same way that epoxy does and so the lifespan of the connector when used with these resin systems is considerably longer.
Trade discounts
| 0-9 | 10-49 | 50+ |
|---|---|---|
| £3.25 | £2.70 | £2.00 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Re-usable silicone connector designed specifically for the resin infusion process. The connector sits inside the vacuum bag and accepts the vacuum hose or resin infusion spiral.
Sold individually
Sold individually. Picture shows connector from above and below for illustration purposes only.
Further Information
For Resin Feed and Vacuum Line Connections
On the underside of the connector is a 4-way channel that ensures a good air channel for the vacuum line into the project or alternatively a good flow of resin into the infusion spiral.
This new design replaces our old resin infusion connectors where a different connector was used for the resin line and the vacuum line whilst at the same time improving the performance of the connector for both these uses.
The silicone connector is designed to accept a 6mm OD hose such as our 6mm ID budget vacuum hose. The larger channel on the underside of the connector is designed to accept our 6mm OD Resin Infusion Spiral.
Lifespan
These infusion connectors are re-usable and can be removed from the cured laminate and resin once and infusion is complete and used again. When used with epoxy resin the connectors will have a finite lifespan and over time the epoxy will start to perish the connectors whereupon they will need replacing. For this reason we offer excellent volume discounts for connectors purchased as 10 or more or even 50 or more at a time.
Polyester and vinylester resins do not perish the connector in the same way that epoxy does and so the lifespan of the connector when used with these resin systems is considerably longer.
Specification
General Properties
| Gross Weight | 0.009 | kg |
|---|
ASK YOUR OWN QUESTION
Customer Product Reviews for Resin Infusion Silicone Connector
We are infusing large parts regularly, usually several per week. These connectors are outstanding. We use them mostly for feed lines. They last a long time (we're using vinylester) and are very economical. I've not seen anything else on the market that comes close to these in price or convenience. Pro tip, they're also useful for vacuum when you have multiple lines or especially islands. Softly pull the bag down using a normal under bag line perimeter with spiral, work out your folds, bridging, etc until it all looks good. Then pull full vac and connect your other vac lines to these with a simple puncture and small wrap of butyl to seal. It save a lot of time vs arranging all the vac lines in advance.
Very good resin infusion silicon connector. I've used mine many times and they're easy to clean.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.