Specification

Weight and Dimensions
Wall Thickness1.5mm
Outside Diameter (OD)9mm
Inside Diameter (ID)6mm
Product Data
ColourClear
Max Service Temp60°C
Suitable Uses
Suitable UsesResin InfusionYes
Suitable UsesVacuum BaggingYes
General Properties
Gross Weight0.21kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

6mm ID Budget PVC Vacuum Hose

6mm ID (internal diameter) clear PVC vacuum hose for general use in composites vacuum bagging and resin infusion. This low-cost hose is ideal resin lines and vacuum lines in resin infusion where resin will cure in the hose meaning it cannot be reused.

Available to buy online in a 5m coil or full 30m coil.


PRODUCT VERSIONS

Roll Length

AVAILABILITY:More than 10 availablefor immediate shipping


PRICE
£5.95ex. VAT
(£1.19 /M)
More than 10 availablefor immediate shipping
QTY
PACKS
PACKS
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications.

This low priced hose is suitable for use as the resin feed and vacuum connection lines for resin infusion hose (where the tube is likely to become fouled with resin and be disposable) and also any vacuum bagging applications that will not be subjected to high temperatures.

Further Information

Connecting the Hose

This PVC vacuum hose should be connected to through-bag connectors, vacuum pumps and other equipment using a 6mm barb hose tail connector.

High Temperature Use

PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 50°C. For high temperature vacuum hose you should always use a silicone vacuum hose.

PRODUCT VIDEOS(1)

General purpose clear PVC vacuum hose for use in a wide range of vacuum composites applications.

This low priced hose is suitable for use as the resin feed and vacuum connection lines for resin infusion hose (where the tube is likely to become fouled with resin and be disposable) and also any vacuum bagging applications that will not be subjected to high temperatures.

Further Information

Connecting the Hose

This PVC vacuum hose should be connected to through-bag connectors, vacuum pumps and other equipment using a 6mm barb hose tail connector.

High Temperature Use

PVC vacuum hose will soften considerably and collapse at high temperatures and so this hose should NOT be used for any vacuum connections where the tube hose will be subjected to temperatures in excess of 50°C. For high temperature vacuum hose you should always use a silicone vacuum hose.

Specification

Weight and Dimensions
Wall Thickness1.5mm
Outside Diameter (OD)9mm
Inside Diameter (ID)6mm
Product Data
ColourClear
Max Service Temp60°C
Suitable Uses
Suitable UsesResin InfusionYes
Suitable UsesVacuum BaggingYes
General Properties
Gross Weight0.21kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Our budget PVC hose is not designed to be used at high temperature. If you wanted to be able to postcure an infusion (after the infusion had comepleted) then it would not be a problem to postcure 'in mould' with the hoses still in place at a high temperature. All that would happen is that the hoses would soften considerably but if the infusion has already completed then this would not affect the laminate. If you need the hose to maintain its shape and airflow at these temperatures then it should NOT be used and instead you should use a high temperature tolerant hose like our 8mm ID Silicone Vacuum hose.

There is no noticeable shrinkage during use of the PVC Hose under full Vacuum.

The outside diameter (OD) is 9mm.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 6mm ID Budget PVC Vacuum Hose

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.