Downloads (1)

Technical Datasheet (TDS)107 KB

Specification

Weight and Dimensions
Thickness0.15mm
Width1520mm
Areal Weight85g/m²
Product Data
ColourWhite
TypePeel-Ply
FormatWoven Fabric
Chemistry / MaterialPolyester
Mechanical Properties
Max Service Temp180°C
General Properties
Gross Weight0.65kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

PP180 Economy Peel Ply Black Tracer (1520mm)

PP180 is a low-cost, general purpose 85gsm white polyester peel ply with black tracer suitable for use at temperatures up to 180°C. Suitable for resin infusion, vacuum bagging and wet-lay applications using a range of resin systems including epoxy, polyester and vinylester.

1.52m (60") wide. Available to buy online in a 5lm folded pack, by the linear metre or in full 100lm rolls.


PRODUCT VERSIONS

Units of Sale

AVAILABILITY:Out of Stock

Sorry, due to extremely strong sales we are currently out of stock on this grade of peel ply. New stock is not due until the end of April. In the meantime, we do have stock of PP200.


PRICE
£10.00ex. VAT
(£1.32 /SQM)
Out of Stock

Sorry, due to extremely strong sales we are currently out of stock on this grade of peel ply. New stock is not due until the end of April. In the meantime, we do have stock of PP200.

We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PP180 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, peel ply resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.

Polyester peel ply offers a lower cost alternative to our aerospace-grade nylon-66 peel ply and is suitable for most applications. The main differences being that polyester peel-ply has a lower temperature tolerance than nylon and also that some resins will bond slightly more to polyester than they will to nylon-66, making the nylon-66 peel ply slightly easier to remove.

PP180 is a tightly woven white fabric with black 'tracer' lines, still visible after wet-out, to reduce the risk of the peel ply being accidentally left on the cured laminate.

Typical Uses

  • Resin infusion (epoxy, polyester or vinylester)
  • Vacuum bagged wet-lay
  • Hand-layup, where secondary bonding is required

How to Buy

This peel-ply is available to buy in a folded 5lm pack, by the linear metre (10lm+) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.

The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.

The 1.52m width of the peel-ply means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.

We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above:

Further Information

Typical Use

Peel ply is most commonly used to create a textured surface on a laminate ideal for secondary laminating/bonding or to act as a porous, removable barrier between the laminate and other bagging consumables for processes such as resin infusion.

Being a porous layer, peel ply allows the vacuum to bleed trapped air and volatiles out of the laminate and so finds applications in wet-lay vacuum bagging, resin infusion and some prepreg laminating.

Using Peel Ply in Different Processes:

  • Hand-Layup
  • [ -- Wet Laminate -- ]
  • PP180 Peel Ply
PRODUCT VIDEOS(2)

PP180 is an economical polyester peel ply suitable for vacuum bagging of wet-lay laminates, peel ply resin infusion and hand-layup applications. It is compatible with a wide range of resin systems including epoxy, polyester and vinylester.

Polyester peel ply offers a lower cost alternative to our aerospace-grade nylon-66 peel ply and is suitable for most applications. The main differences being that polyester peel-ply has a lower temperature tolerance than nylon and also that some resins will bond slightly more to polyester than they will to nylon-66, making the nylon-66 peel ply slightly easier to remove.

PP180 is a tightly woven white fabric with black 'tracer' lines, still visible after wet-out, to reduce the risk of the peel ply being accidentally left on the cured laminate.

Typical Uses

  • Resin infusion (epoxy, polyester or vinylester)
  • Vacuum bagged wet-lay
  • Hand-layup, where secondary bonding is required

How to Buy

This peel-ply is available to buy in a folded 5lm pack, by the linear metre (10lm+) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.

The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.

The 1.52m width of the peel-ply means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.

We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above:

Further Information

Typical Use

Peel ply is most commonly used to create a textured surface on a laminate ideal for secondary laminating/bonding or to act as a porous, removable barrier between the laminate and other bagging consumables for processes such as resin infusion.

Being a porous layer, peel ply allows the vacuum to bleed trapped air and volatiles out of the laminate and so finds applications in wet-lay vacuum bagging, resin infusion and some prepreg laminating.

Using Peel Ply in Different Processes:

  • Hand-Layup
  • [ -- Wet Laminate -- ]
  • PP180 Peel Ply

Downloads (1)

Technical Datasheet (TDS)107 KB

Specification

Weight and Dimensions
Thickness0.15mm
Width1520mm
Areal Weight85g/m²
Product Data
ColourWhite
TypePeel-Ply
FormatWoven Fabric
Chemistry / MaterialPolyester
Mechanical Properties
Max Service Temp180°C
General Properties
Gross Weight0.65kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Peel Ply has an indefinite life span

Yes, our peel ply is permeable to resin which makes it ideal to use in most laminating processes including wet-lay, vacuum bagging and resin infusion.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for PP180 Economy Peel Ply Black Tracer (1520mm)

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.