Need any help or advice?+44 (0)1782 454499
Technical Datasheet (TDS) |
Colour | Blue | |
---|---|---|
Format | Flat Film | |
Type | Release Film | |
Chemistry / Material | Polyolefines and HDPE |
Max Service Temp | 120 | °C |
---|
Width | 1500 | mm |
---|---|---|
Film Thickness | 28 | μm |
Features | Perforation | Yes |
---|
Gross Weight | 0.482 | kg |
---|
This product listed to by in a range of sizes. One or more larger sizes are classed as 'oversize' for delivery to some international destinations which means that delivery might not be available to some countries or when combined with certain types of product (dangerous goods for example).
When checking the delivery cost of your order, if you receive an 'oversize' warning then you may need to select a smaller size of this product in order to continue. Alternatively, please contact us to discuss.
R120 is a very cost-effective, general purpose release film with P3 perforations suitable for use at temperatures up to 120°C. It is recommended when vacuum bagging hand-layup laminates.
1.5m (59") wide, flat sheet format. Available to buy online in a 5lm folded pack, by the linear metre or in full 100lm rolls.
AVAILABILITY:6 in stock available for immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
AeroFilm® R120-P3 is a general purpose composite release film P3 perforated suitable for use at temperatures up to 120°C.
R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. Its P3 perforations provide the ideal restriction to resin flow between the wet laminate and the breather/soaker layer, allowing surplus resin to be drawn out of the laminate without excessive bleed-off of the resin.
Typical Uses
Commonly used for and recommended for:
R120-P3 is equally suited to debulking prepreg laminates where it will prevent the breather layer from sticking to the uncured prepreg and then easily release from the laminate after debulking.
How to Buy
This release film is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale rolls of 250lm (375sqm). Please choose how you would like to purchase from the drop-down list above.
The film itself is 1.50m wide in a single sheet meaning that each linear metre is equal to 1.5sqm.
Volume Pricing
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above::
Further Information
Most commonly used when vacuum bagging a wet layup laminate, peel ply would be placed against the wet laminate, followed by the R120-P3 Perforated Release Film, followed by a breather/soaker layer (so absorb excess resin squeezed from the laminate), enclosed within vacuum bagging film.
AeroFilm® R120-P3 is a general purpose composite release film P3 perforated suitable for use at temperatures up to 120°C.
R120-P3 is our recommended release film when vacuum bagging hand-layup laminates. The film offers excellent release from a wide range of resin systems including epoxy, polyester and vinylester. Its P3 perforations provide the ideal restriction to resin flow between the wet laminate and the breather/soaker layer, allowing surplus resin to be drawn out of the laminate without excessive bleed-off of the resin.
Typical Uses
Commonly used for and recommended for:
R120-P3 is equally suited to debulking prepreg laminates where it will prevent the breather layer from sticking to the uncured prepreg and then easily release from the laminate after debulking.
How to Buy
This release film is available to buy in a folded 5lm pack, by the linear metre (10lm minimum order) or in wholesale rolls of 250lm (375sqm). Please choose how you would like to purchase from the drop-down list above.
The film itself is 1.50m wide in a single sheet meaning that each linear metre is equal to 1.5sqm.
Volume Pricing
We believe we offer unbeatable prices on vacuum bagging consumables. To make comparisons easy, select the different pack/roll sizes from the drop down menu above::
Further Information
Most commonly used when vacuum bagging a wet layup laminate, peel ply would be placed against the wet laminate, followed by the R120-P3 Perforated Release Film, followed by a breather/soaker layer (so absorb excess resin squeezed from the laminate), enclosed within vacuum bagging film.
Technical Datasheet (TDS) |
Colour | Blue | |
---|---|---|
Format | Flat Film | |
Type | Release Film | |
Chemistry / Material | Polyolefines and HDPE |
Max Service Temp | 120 | °C |
---|
Width | 1500 | mm |
---|---|---|
Film Thickness | 28 | μm |
Features | Perforation | Yes |
---|
Gross Weight | 0.482 | kg |
---|
P3 is a set spacing and hole size for the perforation pattern on the film. In this specific case, this refers to holes of 0.5mm diameter spaced 10mm apart across the whole sheet.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product listed to by in a range of sizes. One or more larger sizes are classed as 'oversize' for delivery to some international destinations which means that delivery might not be available to some countries or when combined with certain types of product (dangerous goods for example).
When checking the delivery cost of your order, if you receive an 'oversize' warning then you may need to select a smaller size of this product in order to continue. Alternatively, please contact us to discuss.
All content copyright (C) Easy Composites Ltd, 2020. All rights reserved.