Specification

General Properties
Gross Weight0.013kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Perma-Grit 19mm Disc with Arbor

Smaller sized 19mm Perma-Grit® rotary cutting disc with arbor. Use in a Dremel or similar rotary tool to quickly and accurately trim carbon/glass fibre laminates without splintering or chipping.

This professional quality tungsten carbide grit cutting disc will last a lifetime and make light work of carbon fibre and fibreglass laminates.


AVAILABILITY:More than 20 availablefor immediate shipping


PRICE
£10.42ex. VAT
More than 20 availablefor immediate shipping
QTY
EACH
EACH
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Tough mild steel Perma-Grit cutting disc has tungsten carbide welded to the edges. The discs will cut carbon fibre, fibreglass and all other composites with easy and will not 'frey' or shatter the edges of your precious material. In addition, these discs will not break or lose their edge, providing years of faithful service!

The cutting disc is supplied with a 3mm arbor, locking washer and M3 nut.

Typical Uses

These Perma-Grit cutting wheels are perfect for trimming carbon fibre sheet, slot cutting (like for switch mounting in a carbon dash) and cutting through tough composites (like carbon/steel sandwich panels).

As with all Perma-Grit tools they are also able to cut stainless steel, spring steel, fibreglass, tile brick and more.

Further Information

How to Use

Use the Perma-Grit cutting disc with a variety of power tools sich as Minicraft, Dremel, Flexi-drives and similar small drills. Run at slow to medium speeds and wear eye protection at all times.

Trim lines can be then be rubbed smooth with a Perma-Grit sanding block or file (working from coarse to fine grit) and then finished with rubbing compound and wax.

Note: Regular use of electric drills (like those listed above) with carbon fibre will cause carbon dust to accumulate on your drill motor's electrical contacts and will eventually damage your drill. If possible, blow off your electrical tools after use with an air compressor and work in a well ventilated area to preserve the life of your electrical tools when working with carbon fibre.

Tough mild steel Perma-Grit cutting disc has tungsten carbide welded to the edges. The discs will cut carbon fibre, fibreglass and all other composites with easy and will not 'frey' or shatter the edges of your precious material. In addition, these discs will not break or lose their edge, providing years of faithful service!

The cutting disc is supplied with a 3mm arbor, locking washer and M3 nut.

Typical Uses

These Perma-Grit cutting wheels are perfect for trimming carbon fibre sheet, slot cutting (like for switch mounting in a carbon dash) and cutting through tough composites (like carbon/steel sandwich panels).

As with all Perma-Grit tools they are also able to cut stainless steel, spring steel, fibreglass, tile brick and more.

Further Information

How to Use

Use the Perma-Grit cutting disc with a variety of power tools sich as Minicraft, Dremel, Flexi-drives and similar small drills. Run at slow to medium speeds and wear eye protection at all times.

Trim lines can be then be rubbed smooth with a Perma-Grit sanding block or file (working from coarse to fine grit) and then finished with rubbing compound and wax.

Note: Regular use of electric drills (like those listed above) with carbon fibre will cause carbon dust to accumulate on your drill motor's electrical contacts and will eventually damage your drill. If possible, blow off your electrical tools after use with an air compressor and work in a well ventilated area to preserve the life of your electrical tools when working with carbon fibre.

Specification

General Properties
Gross Weight0.013kg
Can’t find the answer you’re looking for?Ask our technical team a question.

The shaft is 3.1mm diameter and hence will fit no problems.

The cutting discs only come in one grade and it is a medium/fine cut blade compared to other Perma-Grit tools which tend to come in a coarse or fine cut.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Perma-Grit 19mm Disc with Arbor

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.