Need any help or advice?
+44 (0)1782 454499
Specification
Weight and Dimensions
| Width | 25 | mm |
|---|---|---|
| Total Thickness | 0.064 | mm |
| Film Thickness | 25 | μm |
Product Data
| Colour | Green | |
|---|---|---|
| Type | Release Tape | |
| Format | Tape | |
| Chemistry / Material | PET | |
| Adhesive Type | Silicone | |
| Roll Length | 66 | m |
Mechanical Properties
| Max Service Temp | 180 | °C |
|---|---|---|
| Adhesion to Steel | 3.3 | N/cm |
| Tensile Strength | 0.8 | MPa |
General Properties
| Gross Weight | 0.138 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Flash/Release Tape
- FBRT-25
- No reviews
High-temperature, general purpose pressure sensitive PET tape with silicone adhesive. This versatile, easy to remove tape can be used for a wide range of applications in composites including taping mould halves to prevent flash, blanking off holes/details, creating non-stick barriers and holding consumables in place.
66m roll. Available to buy online in 25mm and 50mm widths.
PRODUCT VERSIONS
Roll Length
Width
AVAILABILITY:More than 50 availablefor immediate shipping
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
High-temperature, pressure sensitive PET tape with silicone adhesive used in a very wide range of composites processes including resin infusion and pre-preg. 66m Roll. 25mm and 50mm widths available.
Flash/release breaker tape is very commonly used in the aerospace and wider composites industry, particularly in vacuum bagging, resin infusion and pre-preg processes where it serves number of uses including holding bagging consumables in position, joining temporary barriers, masking moulds, taping flash lines on moulds and providing an instant, temporary release surface on any material. This highly none-stick tape
Our Flash Breaker Tape, also known as composites release tape is manufactured from the highest quality, high temperature tolerance PET and features a pressure sensitive silicone adhesive which will not leave marks or residue on a mould.
Resins including epoxy resin, polyester resin and vinylester resin will NOT stick to this tape and as such it is ideal for blanking off holes in patterns during mould making.
High-temperature, pressure sensitive PET tape with silicone adhesive used in a very wide range of composites processes including resin infusion and pre-preg. 66m Roll. 25mm and 50mm widths available.
Flash/release breaker tape is very commonly used in the aerospace and wider composites industry, particularly in vacuum bagging, resin infusion and pre-preg processes where it serves number of uses including holding bagging consumables in position, joining temporary barriers, masking moulds, taping flash lines on moulds and providing an instant, temporary release surface on any material. This highly none-stick tape
Our Flash Breaker Tape, also known as composites release tape is manufactured from the highest quality, high temperature tolerance PET and features a pressure sensitive silicone adhesive which will not leave marks or residue on a mould.
Resins including epoxy resin, polyester resin and vinylester resin will NOT stick to this tape and as such it is ideal for blanking off holes in patterns during mould making.
Specification
Weight and Dimensions
| Width | 25 | mm |
|---|---|---|
| Total Thickness | 0.064 | mm |
| Film Thickness | 25 | μm |
Product Data
| Colour | Green | |
|---|---|---|
| Type | Release Tape | |
| Format | Tape | |
| Chemistry / Material | PET | |
| Adhesive Type | Silicone | |
| Roll Length | 66 | m |
Mechanical Properties
| Max Service Temp | 180 | °C |
|---|---|---|
| Adhesion to Steel | 3.3 | N/cm |
| Tensile Strength | 0.8 | MPa |
General Properties
| Gross Weight | 0.138 | kg |
|---|
Yes the tape can be used in this way. However, it will leave slight edge lines where the edge of the tape is which will need to be sanded and polished out of the finished table for the very smoothest of finishes.
Against a flat surface, this should be possible. The tape is low tack so it needs to be pressed down well or it may leak. Apply the earing frame to the tape and carefully press all around from the front and the rear to ensure it is properly stuck in place.
ASK YOUR OWN QUESTION
Customer Product Reviews for Flash/Release Tape
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
CUSTOMERS ALSO PURCHASED
CUSTOMERS ALSO PURCHASED
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.