Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

XC130 450g 2x2 Twill 12k Prepreg Carbon Fibre (1250mm) 10m Roll Thumbnail
XC130-C1232T2-450(1250)-10XC130 450g 2x2 Twill 12k Prepreg Carbon Fibre (1250mm) 10m Roll£516.00 /roll

XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 2m Roll Thumbnail
XC110-C331T2-210(1250)-2XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 2m Roll£118.01 /roll

Easy-Lease Chemical Release Agent 100ml Thumbnail
ELRA-01Easy-Lease Chemical Release Agent 100ml£6.80 /pack

XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit£30.60 /kit

EL2 Epoxy Laminating Resin FAST/SLOW 1kg Kit Thumbnail
EP-L2-FS-1EL2 Epoxy Laminating Resin FAST/SLOW 1kg Kit£20.10 /kit

Total £0.00

CUSTOMER GALLERY

Carbon Fibre Corsets

Acclaimed designer Jonathan Harris engineers these amazing high fashion Carbon Fibre corsets from conception to completion using materials including the Uni-Mould System, XPREG System, bagging materials and epoxy resins.

For the corset a combination of processes was needed including producing several moulds using the Uni-Mould Mould Making System.

The main part of the corset was produced using the XPREG pre-preg system with a variety of cloth grades for both strength and looks. The add on side pieces were hand laid up using woven carbon cloth and our EL2 Epoxy laminating Resin. For these kinds of art pieces it was necessary to modify and adjust to ensure the perfect fit to the model used in the photoshoot further adding to the complexity of the project.

Jonathan is also not afraid to try out new methods and ideas and on the neck corset was keen to experiment with the ‘forged Carbon’ look as well as mixing woven cloths and Uni-directional cloths to give a unique appearance and pattern.

Thank you for sharing your incredible work with us Jonathan!


ABOUT JONATHAN HARRIS DESIGNER

Jonathan Harris is an award winning fabricator, designer, innovator, industry educator, stylist, artist and photographer.

Using high end manufacturing methods usually found in the construction of F1 cars, Jonathan creates flexible, lightweight, state of the art versions of traditional corsets and neck pieces.

Thank you for sharing your work Jonathan - it's incredible!


CONTACT INFORMATION

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

XC130 450g 2x2 Twill 12k Prepreg Carbon Fibre (1250mm) 10m Roll Thumbnail
XC130-C1232T2-450(1250)-10XC130 450g 2x2 Twill 12k Prepreg Carbon Fibre (1250mm) 10m Roll£516.00 /roll

XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 2m Roll Thumbnail
XC110-C331T2-210(1250)-2XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre (1250mm) 2m Roll£118.01 /roll

Easy-Lease Chemical Release Agent 100ml Thumbnail
ELRA-01Easy-Lease Chemical Release Agent 100ml£6.80 /pack

XCR Epoxy Coating Resin 1Kg Kit Thumbnail
EP-XCR-1XCR Epoxy Coating Resin 1Kg Kit£30.60 /kit

EL2 Epoxy Laminating Resin FAST/SLOW 1kg Kit Thumbnail
EP-L2-FS-1EL2 Epoxy Laminating Resin FAST/SLOW 1kg Kit£20.10 /kit

Total £0.00

ABOUT JONATHAN HARRIS DESIGNER

Jonathan Harris is an award winning fabricator, designer, innovator, industry educator, stylist, artist and photographer.

Using high end manufacturing methods usually found in the construction of F1 cars, Jonathan creates flexible, lightweight, state of the art versions of traditional corsets and neck pieces.

Thank you for sharing your work Jonathan - it's incredible!


CONTACT INFORMATION

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2020. All rights reserved.