Need any help or advice?+44 (0)1782 454499

Specification

General Properties
Gross Weight0.01kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Spray Nozzle for 50ml and 250ml Bottle

Disposable replacement spray nozzle for our S120 board sealer 50ml and 250ml bottles. After use, the S120 board sealer will set inside the nozzle meaning that the nozzle needs to be replaced for each use; keep a stock of these replacement nozzles handy for future use.

Priced individually, volume discounts apply.


AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
£0.95ex. VAT
More than 100 availablefor immediate shipping
QTY
EACH
EACH

Trade discounts

0-910+
£0.95£0.75
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Disposable plastic trigger spray nozzle suitable for our S120 Advanced Board & Mould Sealer 50ml and 250ml pack sizes.

This spray nozzle can be used to apply a fine mist of board sealer on the surface of patterns and moulds and is recommended when building up the first heavier layers of board sealer. Although not as controllable as a compressed air driven spray gun, these simple spray nozzles offer a convenient way to spray apply the sealer with minimum overspray, set-up and clean-down.

Further Information

Nozzle Life

S120 is fast curing and will cure inside the spray nozzle once left for more than around 30 mins. This means that one nozzle can be used to make multiple spray applications at - for example - 20 minute intervals but if you are leaving longer between applications or are finished for this session then the sealer will cure in the nozzle and it should be disposed of. It is suggested to purchase a number of spare nozzles.

IMPORTANT: Remove Nozzle After Use

Once you are finished for the session, it is essential to remove the nozzle from the bottle and tightly screw the original cap back on. Do no leave the nozzle (and tube) on the S120 bottle otherwise contamination and premature expiry will occur.

1L Pack Size

This spray nozzle fits the 50ml and 250ml pack sizes only. It does NOT fit the 1L size can. If you would like to use a spray nozzle with the 1L can, we would suggest purchasing a 50ml pack and using this -with a spray nozzle - as a refillable spray dispenser.

Trade discounts

0-910+
£0.95£0.75
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Disposable plastic trigger spray nozzle suitable for our S120 Advanced Board & Mould Sealer 50ml and 250ml pack sizes.

This spray nozzle can be used to apply a fine mist of board sealer on the surface of patterns and moulds and is recommended when building up the first heavier layers of board sealer. Although not as controllable as a compressed air driven spray gun, these simple spray nozzles offer a convenient way to spray apply the sealer with minimum overspray, set-up and clean-down.

Further Information

Nozzle Life

S120 is fast curing and will cure inside the spray nozzle once left for more than around 30 mins. This means that one nozzle can be used to make multiple spray applications at - for example - 20 minute intervals but if you are leaving longer between applications or are finished for this session then the sealer will cure in the nozzle and it should be disposed of. It is suggested to purchase a number of spare nozzles.

IMPORTANT: Remove Nozzle After Use

Once you are finished for the session, it is essential to remove the nozzle from the bottle and tightly screw the original cap back on. Do no leave the nozzle (and tube) on the S120 bottle otherwise contamination and premature expiry will occur.

1L Pack Size

This spray nozzle fits the 50ml and 250ml pack sizes only. It does NOT fit the 1L size can. If you would like to use a spray nozzle with the 1L can, we would suggest purchasing a 50ml pack and using this -with a spray nozzle - as a refillable spray dispenser.

Specification

General Properties
Gross Weight0.01kg

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Spray Nozzle for 50ml and 250ml Bottle

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.