Pure Acetone - Easy Composites

Need any help or advice?+44 (0)1782 454499

Downloads (1)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

	Safety Datasheet (SDS) - EN	440 KB

Specification

Product Data

Colour	Clear

General Properties

Gross Weight	0.508	kg

Shipping Information

Restrictions

Special transport restrictions apply to this product; it can be shipped to mainland UK addresses only. Unfortunately, shipping to UK islands (Isle of Wight, Isle of Man, Channel Islands, Northern Ireland) is not possible.

If your delivery address is NOT mainland UK, please remove this item from your basket, otherwise it will not be possible to complete the checkout process.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Acetone is a high strength solvent widely used in the composites industry for cleaning resin from brushes, rollers and equipment.

Acetone will effectively dissolve and clean epoxy, polyester and vinylester resin. It can also be used as a high strength de-greaser/surface preparation and paint remover.

Safety Information

Acetone is a powerful and highly flammable solvent. Please observe the health and safety data.

Downloads (1)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

	Safety Datasheet (SDS) - EN	440 KB

Specification

Product Data

Colour	Clear

General Properties

Gross Weight	0.508	kg

Can’t find the answer you’re looking for?Ask our technical team a question.

Acetone will not dissolve fully cured resins. Partially cured resins will go soft when acetone is applied.

Normally we would not re-commend using acetone because it can break down the epoxy itself, causing problems with the cure and the finished mechanical properties, although some people do use it in this way (in very small quantities) and do not report adverse affects.

If you do need to 'thin' an epoxy very slightly then a better product would be denatured alcohol/purple methylated spirits as those solvents will not damage the resin and will evaporate during the curing process. This would require your own experimentation and the amount of alcohol should be kept to a minimum.

Yes this acetone is 100% pure acetone.

ASK YOUR OWN QUESTION

Shipping Information

Restrictions

If your delivery address is NOT mainland UK, please remove this item from your basket, otherwise it will not be possible to complete the checkout process.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.