Downloads (1)

Technical Datasheet (TDS)236 KB

Specification

Product Data
ColourWhite
FormatWoven Fabric
TypePeel-Ply
Chemistry / MaterialNylon 66 (PA66)
Weight and Dimensions
Width1520mm
Areal Weight85g/m²
Thickness0.17mm
Mechanical Properties
Max Service Temp230°C
General Properties
Gross Weight0.133kg

Shipping Information

This product listed to by in a range of sizes. One or more larger sizes are classed as 'oversize' for delivery to some international destinations which means that delivery might not be available to some countries or when combined with certain types of product (dangerous goods for example).

When checking the delivery cost of your order, if you receive an 'oversize' warning then you may need to select a smaller size of this product in order to continue. Alternatively, please contact us to discuss.

PP230 Nylon 66 Peel Ply Red Tracer (1520mm)

PP230 is a high spec 85gsm PA66 (Nylon 66) peel ply offering higher tear-strength, 230°C operating temperature and an easier release from cured laminate compared to our standard polyester peel ply.

1.52m (60") wide. Available to buy online in a 5lm folded pack, by the linear metre or in full 100lm rolls.


PRODUCT VERSIONS

Units of Sale

AVAILABILITY:More than 200 availablefor immediate shipping


PRICE
£2.25ex. VAT
(£1.48 /SQM)
More than 200 availablefor immediate shipping
QTY
LINEAR METRES
LINEAR METRES
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Aerofilm® PP230 is a high specification 85gsm PA66 (Nylon 66) peel ply offering higher tear-strength and operating temperatures and an easier release from cured laminate compared to our standard polyester peel ply. It is identifiable in the Easy Composites range by its red tracer lines.

PP230 PA66 high temperature peel ply is generally specified for aerospace/prepregs applications and large scale wind energy projects. It has a very high maximum operating temperature of 230°C making it suitable for use even with high cure temperature prepregs.

During production, the nylon peel-ply is rinsed and heat-treated to eradicate any surface contamination.

Typical Uses

PP230 is recommended for any prepreg curing requiring a peel ply (for example where secondary bonding will be undertaken) although care should be taken to ensure that prepreg laminates are not 'dried out' by the peel ply which will absorb some resin during cure.

PP230 is also recommended for applications where peel ply removal is proving difficult, including some epoxy resin infusion projects. Although not release coated, PA66 does provide a slightly improved release from the cured laminate and the added strength of the peel ply makes tear removal more consistent.

  • Prepegs (particularly aerospace, wind energy and tooling)
  • Resin infusion (where polyester peel ply removal is proving difficult)

How to Buy

This peel-ply is available to buy in a folded 5lm pack, by the linear metre (10lm+) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.

The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.

The 1.52m width of the peel-ply means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.

Further Information

PP180 is a tightly woven white fabric with red 'tracer' lines, still visible after wet-out, to reduce the risk of the peel ply being accidentally left on the cured laminate. In the Easy Composites range, alternative grades of peel ply can be identified by different tracer colours.

PP230 can be used like any conventional peel ply and is most commonly positioned directly against the prepreg laminate or reinforcement.

Aerofilm® PP230 is a high specification 85gsm PA66 (Nylon 66) peel ply offering higher tear-strength and operating temperatures and an easier release from cured laminate compared to our standard polyester peel ply. It is identifiable in the Easy Composites range by its red tracer lines.

PP230 PA66 high temperature peel ply is generally specified for aerospace/prepregs applications and large scale wind energy projects. It has a very high maximum operating temperature of 230°C making it suitable for use even with high cure temperature prepregs.

During production, the nylon peel-ply is rinsed and heat-treated to eradicate any surface contamination.

Typical Uses

PP230 is recommended for any prepreg curing requiring a peel ply (for example where secondary bonding will be undertaken) although care should be taken to ensure that prepreg laminates are not 'dried out' by the peel ply which will absorb some resin during cure.

PP230 is also recommended for applications where peel ply removal is proving difficult, including some epoxy resin infusion projects. Although not release coated, PA66 does provide a slightly improved release from the cured laminate and the added strength of the peel ply makes tear removal more consistent.

  • Prepegs (particularly aerospace, wind energy and tooling)
  • Resin infusion (where polyester peel ply removal is proving difficult)

How to Buy

This peel-ply is available to buy in a folded 5lm pack, by the linear metre (10lm+) or in wholesale 100lm rolls. Please choose how you would like to purchase from the drop-down list above.

The material itself is 1.52m wide meaning that each linear metre is equal to 1.52sqm.

The 1.52m width of the peel-ply means that (except for the folded pack) it is supplied in a 160cm long box. Please be aware that this 'oversize' package can result in higher transport costs for some international destinations. The 5m pack is folded into a small package which avoids this 'oversize' charge.

Further Information

PP180 is a tightly woven white fabric with red 'tracer' lines, still visible after wet-out, to reduce the risk of the peel ply being accidentally left on the cured laminate. In the Easy Composites range, alternative grades of peel ply can be identified by different tracer colours.

PP230 can be used like any conventional peel ply and is most commonly positioned directly against the prepreg laminate or reinforcement.

Downloads (1)

Technical Datasheet (TDS)236 KB

Specification

Product Data
ColourWhite
FormatWoven Fabric
TypePeel-Ply
Chemistry / MaterialNylon 66 (PA66)
Weight and Dimensions
Width1520mm
Areal Weight85g/m²
Thickness0.17mm
Mechanical Properties
Max Service Temp230°C
General Properties
Gross Weight0.133kg

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for PP230 Nylon 66 Peel Ply Red Tracer (1520mm)

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

This product listed to by in a range of sizes. One or more larger sizes are classed as 'oversize' for delivery to some international destinations which means that delivery might not be available to some countries or when combined with certain types of product (dangerous goods for example).

When checking the delivery cost of your order, if you receive an 'oversize' warning then you may need to select a smaller size of this product in order to continue. Alternatively, please contact us to discuss.

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2020. All rights reserved.