Need any help or advice?+44 (0)1782 454499
Gross Weight | 0.031 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
305mm Perma-Grit® tungsten carbide grit rodsaw blade, perfect for cutting complex profiles into carbon fibre or fibreglass laminates, without chipping, by hand.
Requires a standard 12" hacksaw frame (not included).
AVAILABILITY:More than 20 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Perma-Grit 305mm rodsaw is the perfect solution for following complex shapes when cutting carbon fibre and composites.
The rodsaw is made from tungsten carbide welded to a mild steel rod, making them almost unbreakable and able to cleanly and quickly cut carbon fibre and other composites without 'fraying' or crazing the material being cut.
Typical uses
Perma-Grit rodsaw blades are the perfect choice for the hand cutting intricate shapes in carbon fibre, fibreglass and all other composites. Use a rodsaw for:
If you are cutting simpler shapes (like gentle curves or straight lines) we would suggest the use of a 305mm hacksaw blade.
Further Information
How to use
Attach the 305mm rodsaw blade to a full sized hacksaw (available from any hardware or tool shop) to cut any shape in your carbon fibre or composite product.
Smooth cut edges using a Perma-Grit file or sanding block. For very intricate shapes such as holes for switches, use a Perma-Grit needle file (all available from Easy Composites) before finishing with rubbing compound and wax.
Perma-Grit 305mm rodsaw is the perfect solution for following complex shapes when cutting carbon fibre and composites.
The rodsaw is made from tungsten carbide welded to a mild steel rod, making them almost unbreakable and able to cleanly and quickly cut carbon fibre and other composites without 'fraying' or crazing the material being cut.
Typical uses
Perma-Grit rodsaw blades are the perfect choice for the hand cutting intricate shapes in carbon fibre, fibreglass and all other composites. Use a rodsaw for:
If you are cutting simpler shapes (like gentle curves or straight lines) we would suggest the use of a 305mm hacksaw blade.
Further Information
How to use
Attach the 305mm rodsaw blade to a full sized hacksaw (available from any hardware or tool shop) to cut any shape in your carbon fibre or composite product.
Smooth cut edges using a Perma-Grit file or sanding block. For very intricate shapes such as holes for switches, use a Perma-Grit needle file (all available from Easy Composites) before finishing with rubbing compound and wax.
Gross Weight | 0.031 | kg |
---|
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.