Specification

General Properties
Gross Weight0.05kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Nozzles for CG110 Gelcoat Spray Gun

Alternative size and replacement nozzles for our CG110 Gelcoat Spray Gun. For different applications. different sized nozzles may be needed for best results. Available in 1, 2,3, 4 and 5mm internal bore sizes and also as a Set of 4 (1,2,3 & 5mm sizes.).


PRODUCT VERSIONS

Size

AVAILABILITY:More than 10 availablefor immediate shipping


PRICE
£12.50ex. VAT
More than 10 availablefor immediate shipping
QTY
EACH
EACH
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

These nozzles are designed to fit our CG110 Gelcoat Spraying Cup Gun. They are ideal for replacement of a damaged or clogged nozzle and also as alternative sizes for spraying differing viscosity gelcoats.

Our CG110 Gelcoat Spraying Gun is supplied with a 4mm nozzle as standard which is ideal for a range of sprayable gelcoats. For different viscosity gelcoats and thicker resins, a different sized nozzle may be necessary to get optimal results. As such, nozzles are available in a variety of bore sizes.

How to Buy

Nozzles are available individually in sizes 1,2,3,4 and 5mm bore sizes. Also available as a set of 4, which includses the 1,2, 3 and 5mm nozzles to give a complete set with the 4mm nozzle already included with the gun itself.

Further Information

How to Fit

The nozzles are simply screwed into place once the old nozzle has been unscrewed. The nozzle only needs to be hand tight. We do not recommend using any tools or grips to aid tightening the nozzle as the brass nozzle may be distorted or damaged if excessive force is used.

Replaement O-rings

The O-ring on the nozzle may be damaged in use and as such is available as a replacement item here: O-rings for CG110 Gelcoat Spraying Cup Gun

Unscrew the nozzle from the gun lid. If it is more than hand tight, use the slotted recess on the CG110 Gun's included tool to engage with the recesses on the nozzle head and unscrew the nozzle.

Remove old O-ring taking care to not damage the soft brass. Clean the O-ring recess of dirt and debris. Carefully slide the new O-ring over the nozzle until it fits in the recess. Screw the nozzle back into the gun lid finger tight only.

These nozzles are designed to fit our CG110 Gelcoat Spraying Cup Gun. They are ideal for replacement of a damaged or clogged nozzle and also as alternative sizes for spraying differing viscosity gelcoats.

Our CG110 Gelcoat Spraying Gun is supplied with a 4mm nozzle as standard which is ideal for a range of sprayable gelcoats. For different viscosity gelcoats and thicker resins, a different sized nozzle may be necessary to get optimal results. As such, nozzles are available in a variety of bore sizes.

How to Buy

Nozzles are available individually in sizes 1,2,3,4 and 5mm bore sizes. Also available as a set of 4, which includses the 1,2, 3 and 5mm nozzles to give a complete set with the 4mm nozzle already included with the gun itself.

Further Information

How to Fit

The nozzles are simply screwed into place once the old nozzle has been unscrewed. The nozzle only needs to be hand tight. We do not recommend using any tools or grips to aid tightening the nozzle as the brass nozzle may be distorted or damaged if excessive force is used.

Replaement O-rings

The O-ring on the nozzle may be damaged in use and as such is available as a replacement item here: O-rings for CG110 Gelcoat Spraying Cup Gun

Unscrew the nozzle from the gun lid. If it is more than hand tight, use the slotted recess on the CG110 Gun's included tool to engage with the recesses on the nozzle head and unscrew the nozzle.

Remove old O-ring taking care to not damage the soft brass. Clean the O-ring recess of dirt and debris. Carefully slide the new O-ring over the nozzle until it fits in the recess. Screw the nozzle back into the gun lid finger tight only.

Specification

General Properties
Gross Weight0.05kg

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Nozzles for CG110 Gelcoat Spray Gun

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.