Need any help or advice?+44 (0)1782 454499

CUSTOMER GALLERY

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
XCR Black Epoxy Basecoat 1kg Kit Thumbnail
EP-XBC-1XCR Black Epoxy Basecoat 1kg Kit£27.00 /kit

Virgin Carbon Fibre Chopped Tow (12mm) 750g Thumbnail
CF-CT-12-075Virgin Carbon Fibre Chopped Tow (12mm) 750g£25.95 /pack

12mm (10mm) Woven Finish Roll Wrapped Carbon Fibre Tube 2000mm Thumbnail
CFT-WF-12-10-212mm (10mm) Woven Finish Roll Wrapped Carbon Fibre Tube 2000mm£22.45 /length

XCR Epoxy Coating Resin 5kg Kit Thumbnail
EP-XCR-5XCR Epoxy Coating Resin 5kg Kit£107.35 /kit

Total £0.00
TOOLS & EQUIPMENT
OV301 Precision Composites Curing Oven Thumbnail
OVEN301OV301 Precision Composites Curing Oven£1749.00 /each

Total £0.00

CUSTOMER GALLERY

Modified Little Tykes Cozy Coupe

We decided as a development exercise to produce a random item that would be quite funny and unique in carbon fibre. We chose a Little Tikes, Cozy Coupe which at the end of the build, we would auction off for a children’s charity. It is a young kids foot powered car and they have quite a cult following these days.

This build included Easy Composites Carbon fibre chopped tow to create a forged carbon effect. We used the XCR basecoat for adhesion and the XCR Epoxy Coating Resin to set the carbon. For the top section we layered gold leaf with resin to give a yellow/gold finish.

For the curing process we used the OV301 Composites Curing Oven for an initial cure before then lacquering the parts in both a clear and tinted finish to replicate the red and yellow. Some of the other custom parts used cured sheet carbon that was milled with our logo and we also used a gold carbon fabric from another company, along with your XCR products.

For the front and rear axles, we used your woven finish carbon fibre tubes to cover the metal threaded bar and both widened and lower the width including adding some other custom touches.


ABOUT CARBONWURKS

Carbonwurks

Carbonwurks was founded by Daniel McKenzie back in 2009. He used to race professionally in Formula 3 & Formula 2 as well as with both Aston Martin and Ferrari in various GT championships.

While racing and being subjected to some monstrous crashes, for the most part escaping completely unscathed, the fascination with carbon fibre began. Since then, he started Carbonwurks with an aim to produce and sell high quality carbon fibre parts for road cars and undertake repairs, create bespoke parts as well as offering performance tuning facilities.

Some near 15 years later, we offer a range of services in house and with this in house production we have been using Easy Composites components since day 1 of offering in house production (around 2015). Our now head fabricator started his experience off when we sent him on one of Easy Composites Training Courses back in 2016. Our products are proudly Made in Britain accredited and we have a small but talented workforce who produce some great parts.


CONTACT INFORMATION

USED IN THIS PROJECT

Although not necessarily an exhaustive list, the following tools and materials, supplied by Easy Composites, were used in this project.

The quantity shown below is the approximate amount used in the project rounded up to the nearest available kit size or quantity.

MATERIALS & CONSUMABLES
XCR Black Epoxy Basecoat 1kg Kit Thumbnail
EP-XBC-1XCR Black Epoxy Basecoat 1kg Kit£27.00 /kit

Virgin Carbon Fibre Chopped Tow (12mm) 750g Thumbnail
CF-CT-12-075Virgin Carbon Fibre Chopped Tow (12mm) 750g£25.95 /pack

12mm (10mm) Woven Finish Roll Wrapped Carbon Fibre Tube 2000mm Thumbnail
CFT-WF-12-10-212mm (10mm) Woven Finish Roll Wrapped Carbon Fibre Tube 2000mm£22.45 /length

XCR Epoxy Coating Resin 5kg Kit Thumbnail
EP-XCR-5XCR Epoxy Coating Resin 5kg Kit£107.35 /kit

Total £0.00
TOOLS & EQUIPMENT
OV301 Precision Composites Curing Oven Thumbnail
OVEN301OV301 Precision Composites Curing Oven£1749.00 /each

Total £0.00

ABOUT CARBONWURKS

Carbonwurks

Carbonwurks was founded by Daniel McKenzie back in 2009. He used to race professionally in Formula 3 & Formula 2 as well as with both Aston Martin and Ferrari in various GT championships.

While racing and being subjected to some monstrous crashes, for the most part escaping completely unscathed, the fascination with carbon fibre began. Since then, he started Carbonwurks with an aim to produce and sell high quality carbon fibre parts for road cars and undertake repairs, create bespoke parts as well as offering performance tuning facilities.

Some near 15 years later, we offer a range of services in house and with this in house production we have been using Easy Composites components since day 1 of offering in house production (around 2015). Our now head fabricator started his experience off when we sent him on one of Easy Composites Training Courses back in 2016. Our products are proudly Made in Britain accredited and we have a small but talented workforce who produce some great parts.


CONTACT INFORMATION

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.