Need any help or advice?+44 (0)1782 454499
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
Safety Datasheet (SDS) | 729 KB | |
Dutch Safety DataSheet | 818 KB |
Colour | Clear | |
---|---|---|
Shelf Life | 6 | Months |
Chemistry / Material | Polyester | |
Viscosity | 16 | mPa.s |
Max Service Temp | 60 | °C |
---|
Gross Weight | 0.045 | kg |
---|
Special transport restrictions apply to this product; it can be shipped to mainland UK addresses only. Unfortunately, shipping to UK islands (Isle of Wight, Isle of Man, Channel Islands, Northern Ireland) is not possible.
If your delivery address is NOT mainland UK, please remove this item from your basket, otherwise it will not be possible to complete the checkout process.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
General purpose MEKP (methyl ethyl ketone peroxide) catalyst suitable for use with most polyester and vinylester resins and gelcoats. This standard reactivity MEKP is the catalyst (hardener) used for all Easy Composites polyester and vinylester resin systems.
Typically added at 0.5 - 3%.
Available to buy online in 25ml, 125ml, 250ml and 500ml kits.
AVAILABILITY:16 in stock available for immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
MEKP Catalyst for polyester and vinylester resin and gelcoat systems including our GP Polyester Resin, Clear Polyester Gel Coat and Uni-Mould system.
MEKP Catalyst is typically used as a polyester resin catalyst, fibreglass catalyst or vinylester resin systems at a ratio of between 1 and 3%, according to the pot-life and cure speed required and the ambient temperature. Always follow the guidelines that accompany your specific resin system.
Further Information
Safety Information
MEKP is a powerful oxidiser and corrosive. Please observe the health and safety data.
Pack Sizes for Shipping
Due to strict shipping regulations concerning MEKP, online orders for kit sizes of 250ml and 500ml will be shipped as multiple 125ml bottles. This keeps the MEKP under 'limited quantity' shipping regulations which avoids much higher shipping charges and potential delays and incurs no extra cost compared to larger pack sizes.
MEKP Catalyst for polyester and vinylester resin and gelcoat systems including our GP Polyester Resin, Clear Polyester Gel Coat and Uni-Mould system.
MEKP Catalyst is typically used as a polyester resin catalyst, fibreglass catalyst or vinylester resin systems at a ratio of between 1 and 3%, according to the pot-life and cure speed required and the ambient temperature. Always follow the guidelines that accompany your specific resin system.
Further Information
Safety Information
MEKP is a powerful oxidiser and corrosive. Please observe the health and safety data.
Pack Sizes for Shipping
Due to strict shipping regulations concerning MEKP, online orders for kit sizes of 250ml and 500ml will be shipped as multiple 125ml bottles. This keeps the MEKP under 'limited quantity' shipping regulations which avoids much higher shipping charges and potential delays and incurs no extra cost compared to larger pack sizes.
Colour | Clear | |
---|---|---|
Shelf Life | 6 | Months |
Chemistry / Material | Polyester | |
Viscosity | 16 | mPa.s |
Max Service Temp | 60 | °C |
---|
Gross Weight | 0.045 | kg |
---|
The reason we can’t ship MEKP outside of the UK is because it is highly oxidizing, and standard carrier services do not permit it to be transported.
However you can purchase MEKP from any suppliers of composite materials including fibreglass (GRP) shops, roofing suppliers, boat buildings, car bodyshops etc. There is nothing special about the MEKP we supply, you can ask at your local supplier for ‘Standard reactivity MEKP’; brands such as Andanox KP9, Akperox A30, Butanox M50 (Akzo Nobel) are all suitable and widely available.
MEKP will NOT work as a catalyst for any epoxy resin - the resin will NOT cure. The chemistry of the two resin systems is completely different. Epoxy needs the correct matching hardener added in the correct mixing ratio to achieve a proper cure.
MEKP is colourless so is not going to cause any issues with colour changes with the resin itself.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Special transport restrictions apply to this product; it can be shipped to mainland UK addresses only. Unfortunately, shipping to UK islands (Isle of Wight, Isle of Man, Channel Islands, Northern Ireland) is not possible.
If your delivery address is NOT mainland UK, please remove this item from your basket, otherwise it will not be possible to complete the checkout process.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.