Downloads (1)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

Safety Datasheet (SDS)166 KB

Specification

Product Data
ColourClear
Chemistry / MaterialOther
Cured Mechanical Properties
Max Service Temp80°C
General Properties
Gross Weight0.63kg

Shipping Information

In the currently selected pack size, this product is classed as 'Limited Quantity Dangerous Goods' for the purposes of transport. This means that transport restrictions apply to certain destinations.

No restrictions or surcharges shipping by road to:

UK, Ireland, Channel Islands, Isle of Man, Austria, Belgium, France, Germany, Luxembourg, Monaco, Netherlands, Norway, Finland, , Czech Republic, Denmark, Hungary, Italy, Poland, Portugal, Spain, Andorra, Switzerland, Estonia, Latvia, Lithuania, Slovakia, Slovenia, Sweden

Shipping possible by airfreight (£55 surcharge applies) to:

United States, Finland, Bahrain, Hong Kong, Japan, Republic of Korea, Kuwait, Singapore, Taiwan, United Arab Emirates, Trinidad and Tobago

Can't ship to:

All other countries. If your country is not listed above then unfortunately we can't ship this product to you.

For very large orders, specialist shipping can be arranged. Please contact us to discuss.

FusionFix GP Spray Adhesive

FusionFix GP is a non-contaminating, general purpose spray adhesive for use in composites, especially vacuum resin infusion. FusionFix can be used to help hold reinforcements, core materials, inserts and vacuum bagging consumables in position whilst preparing a laminate for infusion.

Thermoplastic-based and rubber-free, FusionFix GP will not contaminate the laminate or affect interlaminar shear strength.

Available to buy online in 500ml spray cans.


AVAILABILITY:More than 30 availablefor immediate shipping


PRICE
£11.94inc. VAT
More than 30 availablefor immediate shipping
QTY
EACH
EACH

Trade discounts

0-56+
£11.94£9.54
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

FusionFix™ GP is a high performance infusion spray adhesive designed specifically for temporary positioning of fibre reinforcements, core materials, fixings and bagging consumables during resin infusion and other composites laminating processes. It is ideal as a vacuum infusion spray adhesive.

Unlike conventional spray adhesives, FusionFix™ GP has been developed to be compatible with all resin systems including epoxy, vinylester and polyester resin systems. Even in the case of over-application, FusionFix™ GP will not reduce the interlaminar shear strength of composite laminates.

FusionFix™ GP has been tested and found to be compatible with a wide range of resin systems however you should always conduct your own tests to ensure compatibility.

IMPORTANT: Although a very light application of FusionFix GP is almost undetectable, the product is NOT intended for use as a spray adhesive for unpainted, natural finish cosmetic carbon fibre parts. It is NOT completely transparent and will be visible when used to hold reinforcement directly onto a mould surface.

Further Information

Instructions for Use

Thoroughly shake the can before use. After use, clean the nozzle through by turning the can upside down and spraying briefly.

Apply the infusion spray tack sparingly, ensuring that you use the least adhesive necessary. Be particularly sparing when spraying directly onto the mould surface to position visible surface layers of reinforcement; a light misting from a distance of 30cm should be sufficient.

For positioning of heavier reinforcements and core materials the adhesive can be applied to one or both surfaces at a coverage of around 30g/m². The adhesive remains tacky for up to 20 minutes but is most tacky after around 2 minutes once the solvent carrier evaporates.

Before clear-coating or painting parts, use alcohol to remove adhesive traces from the surface of the parts.

Trade discounts

0-56+
£11.94£9.54
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

FusionFix™ GP is a high performance infusion spray adhesive designed specifically for temporary positioning of fibre reinforcements, core materials, fixings and bagging consumables during resin infusion and other composites laminating processes. It is ideal as a vacuum infusion spray adhesive.

Unlike conventional spray adhesives, FusionFix™ GP has been developed to be compatible with all resin systems including epoxy, vinylester and polyester resin systems. Even in the case of over-application, FusionFix™ GP will not reduce the interlaminar shear strength of composite laminates.

FusionFix™ GP has been tested and found to be compatible with a wide range of resin systems however you should always conduct your own tests to ensure compatibility.

IMPORTANT: Although a very light application of FusionFix GP is almost undetectable, the product is NOT intended for use as a spray adhesive for unpainted, natural finish cosmetic carbon fibre parts. It is NOT completely transparent and will be visible when used to hold reinforcement directly onto a mould surface.

Further Information

Instructions for Use

Thoroughly shake the can before use. After use, clean the nozzle through by turning the can upside down and spraying briefly.

Apply the infusion spray tack sparingly, ensuring that you use the least adhesive necessary. Be particularly sparing when spraying directly onto the mould surface to position visible surface layers of reinforcement; a light misting from a distance of 30cm should be sufficient.

For positioning of heavier reinforcements and core materials the adhesive can be applied to one or both surfaces at a coverage of around 30g/m². The adhesive remains tacky for up to 20 minutes but is most tacky after around 2 minutes once the solvent carrier evaporates.

Before clear-coating or painting parts, use alcohol to remove adhesive traces from the surface of the parts.

Downloads (1)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

Safety Datasheet (SDS)166 KB

Specification

Product Data
ColourClear
Chemistry / MaterialOther
Cured Mechanical Properties
Max Service Temp80°C
General Properties
Gross Weight0.63kg
Can’t find the answer you’re looking for?Ask our technical team a question.
Yes, you can use FusionFix on the core, the reinforcement or both. In common with many spray adhesives there is a 'tack window' during which time the tack level is ideal, after which point the tack will fall away. Providing you bring your elements together during the tack window then the adhesive should be effective.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for FusionFix GP Spray Adhesive

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

In the currently selected pack size, this product is classed as 'Limited Quantity Dangerous Goods' for the purposes of transport. This means that transport restrictions apply to certain destinations.

No restrictions or surcharges shipping by road to:

UK, Ireland, Channel Islands, Isle of Man, Austria, Belgium, France, Germany, Luxembourg, Monaco, Netherlands, Norway, Finland, , Czech Republic, Denmark, Hungary, Italy, Poland, Portugal, Spain, Andorra, Switzerland, Estonia, Latvia, Lithuania, Slovakia, Slovenia, Sweden

Shipping possible by airfreight (£55 surcharge applies) to:

United States, Finland, Bahrain, Hong Kong, Japan, Republic of Korea, Kuwait, Singapore, Taiwan, United Arab Emirates, Trinidad and Tobago

Can't ship to:

All other countries. If your country is not listed above then unfortunately we can't ship this product to you.

For very large orders, specialist shipping can be arranged. Please contact us to discuss.

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2020. All rights reserved.