Need any help or advice?
+44 (0)1782 454499
Downloads (3)
 | Safety Datasheet (SDS) |  200 KB |
| Dutch Safety DataSheet | 248 KB |
| Technical Data Sheet (TDS) | 589 KB |
Specification
General Properties
| Gross Weight | 0.7 | kg |
|---|
Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
EASYGLOSS Carbon Fibre Polish & Protect
- PCEG-BL-05
- No reviews
Specially formulated UV protective finishing polish from Italian polishing experts Pai Cristal, Easy Gloss is recommended for polishing and protecting bare carbon fibre parts. Its super-fine cutting action restores finish whilst its nano-waxes provide valuable protection from UV light and water and leave a showroom shine.
Available to buy online in 500g or 1kg packs.
PRODUCT VERSIONS
Pack Size
AVAILABILITY:More than 20 availablefor immediate shipping
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Pai Cristal's EASYGLOSS Carbon Fibre Polish & Protect provides the ultimate showroom finish for carbon fibre or dark-finish composite parts. Whether you're a carbon fibre manufacturer adding final finish to production carbon fibre parts or an owner wanting to restore and protect your own carbon fibre parts, EASYGLOSS is the only nano finishing polish with protective waxes and additives designed specifically for carbon fibre and dark-coloured composite parts.
This special 'carbon line' version of EASYGLOSS is black in colour, deepening the contrast and lustre of your carbon fibre parts without ever revealing 'white spots', caused when light coloured polished and waxes accumulate in tiny surface pin-holes on carbon fibre parts.
EASYGLOSS is the only carbon fibre polish with an ultra light cutting action combined with advanced waxes and additives that will protect carbon fibre parts from UV rays, natural elements, salt and water. Its advanced polymer technology allows the protective agents to adhere to the polished surface providing a lasting, water repellent, protective film along with an incredibly radiant gloss.
Further Information
EASYGLOSS will polish and protect carbon fibre and other composite parts quickly and easy. It can be applied using a power polisher or even by hand.
For the fastest, best results - use a power polisher. Pour a small quantity of the polish onto a soft wavy foam polishing pad, starting with the polisher on a low speed and spreading the polish over the surface of the part in a criss-crossed pattern. Gradually increase the speed of the polisher to 800 - 1500 RPM, being careful not to allow heat to build up on the surface of the part.
Once the EASYGLOSS has been applied across the whole surface of the part and polished using a light polishing action, let the surface dry completely before buffing off using a clean microfibre polishing cloth.
Pai Cristal's EASYGLOSS Carbon Fibre Polish & Protect provides the ultimate showroom finish for carbon fibre or dark-finish composite parts. Whether you're a carbon fibre manufacturer adding final finish to production carbon fibre parts or an owner wanting to restore and protect your own carbon fibre parts, EASYGLOSS is the only nano finishing polish with protective waxes and additives designed specifically for carbon fibre and dark-coloured composite parts.
This special 'carbon line' version of EASYGLOSS is black in colour, deepening the contrast and lustre of your carbon fibre parts without ever revealing 'white spots', caused when light coloured polished and waxes accumulate in tiny surface pin-holes on carbon fibre parts.
EASYGLOSS is the only carbon fibre polish with an ultra light cutting action combined with advanced waxes and additives that will protect carbon fibre parts from UV rays, natural elements, salt and water. Its advanced polymer technology allows the protective agents to adhere to the polished surface providing a lasting, water repellent, protective film along with an incredibly radiant gloss.
Further Information
EASYGLOSS will polish and protect carbon fibre and other composite parts quickly and easy. It can be applied using a power polisher or even by hand.
For the fastest, best results - use a power polisher. Pour a small quantity of the polish onto a soft wavy foam polishing pad, starting with the polisher on a low speed and spreading the polish over the surface of the part in a criss-crossed pattern. Gradually increase the speed of the polisher to 800 - 1500 RPM, being careful not to allow heat to build up on the surface of the part.
Once the EASYGLOSS has been applied across the whole surface of the part and polished using a light polishing action, let the surface dry completely before buffing off using a clean microfibre polishing cloth.
Specification
General Properties
| Gross Weight | 0.7 | kg |
|---|
Yes, in fact this is really what this polish is designed for. Although the layer of resin on un-gelcoated parts is very thin; the cutting action of this polish is incredibly fine light polishing of the surface on manufacture and occasionally during its service life to restore shine, should not cause any problems with exposing the fibres themselves.
This product is designed for final finishing to the highest of gloss. Generally surface fading is in the surface layer of resin. In the worst cases it may need sanding off before polishing with a compound such as our NW1 Super Cutting Compound Black. Lighter damage will likely be restored using our TOPFINISH 2 Black Nano Polishing Compound. You can then use the EASYGLOSS to give it that final finishing touch with the addition of protective waxes to help with long term durability should you want to.
For a carbon fibre item that is matte or satin finish either from a lacquer or gel-coat, we would recommend our NW1 Super Cutting Compound Black which has the ability to go from 1200 grit all the way to a full gloss finish, so is better suited to items that are fully matte. EASYGLOSS has an ultra light cutting action so is better suited to finishing to a very high gloss that already have a reasonable shine to them. If the part has a matte finish from sanding bust does not have a lacquer or clear-coat it may be necessary to spray a clear-coat as a polishing compound will never achieve a full gloss if the fibre is exposed.
ASK YOUR OWN QUESTION
Customer Product Reviews for EASYGLOSS Carbon Fibre Polish & Protect
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
100% SECURE
PAYMENT METHODS
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.