Downloads (3)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

Safety Datasheet (SDS)403 KB
Dutch Safety DataSheet232 KB
Technical Datasheet (TDS)266 KB

Specification

General Properties
Gross Weight0.512kg

Shipping Information

Restrictions

In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.

Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.

For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

MC1 Mould Cleaner

Highly effective solvent cleaner for the cleaning and preparation of moulds prior to application of new release agent. Use to remove old release agents (including chemical release agents and wax), dirt, grease and other contaminants from a mould's surface, without damaging the mould, prior to coating with Easy-Lease or similar release agents.

Available to buy online in 500ml and 1l tins.


PRODUCT VERSIONS

Pack Size

AVAILABILITY:More than 10 availablefor immediate shipping


PRICE
£8.50ex. VAT
More than 10 availablefor immediate shipping
QTY
EACH
EACH
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

MC1 Mould Cleaner is a blend of solvents that is designed to dissolve and clean mould surface contamination such as wax, dirt, oil and grease. It will remove any previously applied release system and prepare the mould surface for any release agent application. The solvents used are designed to be none-aggressive to all commonly used mould materials.

MC1 Mould Cleaner forms part of Easy Composites' Universal Chemical Release Agent system. Use in conjunction with CR1 Easy-Lease Chemical Release Agent for a totally reliable mould release system compatible with almost all resin systems and mould materials.

How to Buy

MC1 Mould Cleaner is available in a smaller 500ml pack and a larger 1l pack. Please choose the pack size you require from the drop-down list above.

Further Information

Application Guide

If moulds are heavily soiled remove any excess dirt/dust/grease prior to application by wiping or washing with standard detergent and drying thoroughly.

Using a clean cotton cloth apply the cleaner by wiping firmly over the mould surface.

Using a second clean and dry cloth remove the cleaner from the mould before it has evaporated, by doing this the contaminates will be absorbed while they are suspended in the cleaner.

Repeat this process as necessary, using clean cloths at each stage, a minimum of 2 applications is recommended, heavily waxed or soiled moulds would require many more.

Note: Large mould surfaces may need to be done in stages to avoid evaporation, depending upon working temperature and mould complexity around 0.5sqm should be considered the maximum area per application.

MC1 Mould Cleaner is a blend of solvents that is designed to dissolve and clean mould surface contamination such as wax, dirt, oil and grease. It will remove any previously applied release system and prepare the mould surface for any release agent application. The solvents used are designed to be none-aggressive to all commonly used mould materials.

MC1 Mould Cleaner forms part of Easy Composites' Universal Chemical Release Agent system. Use in conjunction with CR1 Easy-Lease Chemical Release Agent for a totally reliable mould release system compatible with almost all resin systems and mould materials.

How to Buy

MC1 Mould Cleaner is available in a smaller 500ml pack and a larger 1l pack. Please choose the pack size you require from the drop-down list above.

Further Information

Application Guide

If moulds are heavily soiled remove any excess dirt/dust/grease prior to application by wiping or washing with standard detergent and drying thoroughly.

Using a clean cotton cloth apply the cleaner by wiping firmly over the mould surface.

Using a second clean and dry cloth remove the cleaner from the mould before it has evaporated, by doing this the contaminates will be absorbed while they are suspended in the cleaner.

Repeat this process as necessary, using clean cloths at each stage, a minimum of 2 applications is recommended, heavily waxed or soiled moulds would require many more.

Note: Large mould surfaces may need to be done in stages to avoid evaporation, depending upon working temperature and mould complexity around 0.5sqm should be considered the maximum area per application.

Downloads (3)

This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.

Safety Datasheet (SDS)403 KB
Dutch Safety DataSheet232 KB
Technical Datasheet (TDS)266 KB

Specification

General Properties
Gross Weight0.512kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Yes, Mould Cleaner will strip off all release agents during the process of cleaning the mould. This means it is essential to re-apply your preferred release agent prior to using the mould again.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for MC1 Mould Cleaner

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.

Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.

For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.