Specification

General Properties
Gross Weight6kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

The packaged size of this product is very large (exceeding 1.8m in length or 1m in width). As a result, shipping to some regions and countries will include a significant oversize surcharge, whilst shipping to some countries is not possible.

Where available, swapping to a smaller variant of this product may avoid this charge.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Universal Carbon Fibre Front Splitter Kit

High performance light-weight carbon fibre splitter panel with a foam core. Carbon fibre front splitter to suit all vehicles. Various sizes available.

PRODUCT VERSIONS

Width

AVAILABILITY:1 in stock available for immediate shipping


PRICE
£211.00ex. VAT
1 in stock available for immediate shipping
QTY
EACH
EACH
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Product Description

6mm thick, high performance carbon fibre panel designed to be fitted to any road-going car with an appropriate front spoiler/bumper. The Universal Front Splitter is a very effective aerodynamic enhancement for your vehicle which can considerably increase front downforce and reduce drag by smoothing the airflow around and under your front spoiler.

Front splitters of this variety have their roots in touring car, DTM and GT use but there is no reason why the same aerodynamic benefits cannot be gained by a wide variety of modified road-cars including Mitsubishi, Subaru, Vauxhall, Peugeot, Citroen, Ford, in fact just about any track-focused car.

How is the splitter universal?

Because of the huge range of OEM and aftermarket front bumpers/spoilers that are on the road, even across one car model, we provide our front splitter oversize and include all necessary tools and instructions to cut it to the perfect size to match the profile of any front spoiler.

Technical details

The splitter itself is a sheet of ultra-lightweight, high performance carbon fibre sandwich panel base on our well renowned High Strength Carbon Fibre Foam Core Panel. To provide the required stiffness at the lightest weight possible, the splitter uses a combination of genuine 2/2 twill 3k carbon fibre, closed-cell PVC foam core and E-Glass cured at pressure and temperature using an epoxy resin matrix.

Supporting the splitter at the front are high performance adjustable stainless steel tie-bars with omni-direction fixings allowing them to be fitted at almost any angle.

Kit contents
  • 1 x Carbon fibre front splitter sandwich panel
  • 2 x Stainless steel adjustable tie-bars with omni-directional fixings
  • 8 x Stainless steel bolts and Nyloc nuts.
  • 2.5m black edging strip
Cutting and Fitting the Universal Front Splitter

Cutting and fitting the front splitter to a professional standard should be achievable using only the following basic tools:

Click here to download full instructions in PDF format

Simplified fitting instructions

Basically, the splitter is installed as follows:

  1. Use the cardboard packaging that the splitter kit comes in to create a cutting template for the splitter by positioning it under your front bumper and following the bumper line with a pen to copy it onto the cardboard.
  2. Cut out the cardboard template and offer it up to the vehicle, adjusting as necessary.
  3. Position the template on the splitter blank (the uncut carbon fibre panel) and scribe round it onto the panel.
  4. Cut the panel with a hacksaw and then smooth the edges with production paper. Finish the front edge of the splitter by gluing the edging strip to it.
  5. Position the splitter under the front bumper, secure with clamps then drill the rear fixing points and fix using the supplied bolts and washers.
  6. Decide on the best position for the front tie-bars then mark and drill the top fixing points. Bolt articulated bushes to your bumper.
  7. Align and drill the lower mounting points into the splitter panel and screw the tie-bars to the splitter.
  8. Tighten your splitter using the adjustment on the tie-bars to ensure and strong and secure fitment.
Choosing the Right Size
How to find out what size splitter panel you need

Due to the high cost of carbon fibre, we offer our universal splitter kit in two sizes. The size relates to the depth of the splitter panel blank. Knowing which size you will need for your car is very easy.

Use a tape measure to measure the depth of your front spoiler from the front of the curve to the back of the side returns. Add approx 70mm to that measurement and buy the smallest blank that you can get away with.

All blanks measure 1980mm wide which is wide enough even for the track of supercars such as Porsches, Ferraris and Ultimas (shown pictured). The blank is available in 2 depths; 480mm and 980mm deep. Choose the size you need from the drop-down list above.

Safety Disclaimer

As with any modification to your vehicle, installation of the universal front splitter should be done by a competent installer in compliance with prevailing road safety legislation in your country/region. If in doubt, consult a local vehicle body-shop.

PRODUCT VIDEOS(1)

Product Description

6mm thick, high performance carbon fibre panel designed to be fitted to any road-going car with an appropriate front spoiler/bumper. The Universal Front Splitter is a very effective aerodynamic enhancement for your vehicle which can considerably increase front downforce and reduce drag by smoothing the airflow around and under your front spoiler.

Front splitters of this variety have their roots in touring car, DTM and GT use but there is no reason why the same aerodynamic benefits cannot be gained by a wide variety of modified road-cars including Mitsubishi, Subaru, Vauxhall, Peugeot, Citroen, Ford, in fact just about any track-focused car.

How is the splitter universal?

Because of the huge range of OEM and aftermarket front bumpers/spoilers that are on the road, even across one car model, we provide our front splitter oversize and include all necessary tools and instructions to cut it to the perfect size to match the profile of any front spoiler.

Technical details

The splitter itself is a sheet of ultra-lightweight, high performance carbon fibre sandwich panel base on our well renowned High Strength Carbon Fibre Foam Core Panel. To provide the required stiffness at the lightest weight possible, the splitter uses a combination of genuine 2/2 twill 3k carbon fibre, closed-cell PVC foam core and E-Glass cured at pressure and temperature using an epoxy resin matrix.

Supporting the splitter at the front are high performance adjustable stainless steel tie-bars with omni-direction fixings allowing them to be fitted at almost any angle.

Kit contents
  • 1 x Carbon fibre front splitter sandwich panel
  • 2 x Stainless steel adjustable tie-bars with omni-directional fixings
  • 8 x Stainless steel bolts and Nyloc nuts.
  • 2.5m black edging strip
Cutting and Fitting the Universal Front Splitter

Cutting and fitting the front splitter to a professional standard should be achievable using only the following basic tools:

Click here to download full instructions in PDF format

Simplified fitting instructions

Basically, the splitter is installed as follows:

  1. Use the cardboard packaging that the splitter kit comes in to create a cutting template for the splitter by positioning it under your front bumper and following the bumper line with a pen to copy it onto the cardboard.
  2. Cut out the cardboard template and offer it up to the vehicle, adjusting as necessary.
  3. Position the template on the splitter blank (the uncut carbon fibre panel) and scribe round it onto the panel.
  4. Cut the panel with a hacksaw and then smooth the edges with production paper. Finish the front edge of the splitter by gluing the edging strip to it.
  5. Position the splitter under the front bumper, secure with clamps then drill the rear fixing points and fix using the supplied bolts and washers.
  6. Decide on the best position for the front tie-bars then mark and drill the top fixing points. Bolt articulated bushes to your bumper.
  7. Align and drill the lower mounting points into the splitter panel and screw the tie-bars to the splitter.
  8. Tighten your splitter using the adjustment on the tie-bars to ensure and strong and secure fitment.
Choosing the Right Size
How to find out what size splitter panel you need

Due to the high cost of carbon fibre, we offer our universal splitter kit in two sizes. The size relates to the depth of the splitter panel blank. Knowing which size you will need for your car is very easy.

Use a tape measure to measure the depth of your front spoiler from the front of the curve to the back of the side returns. Add approx 70mm to that measurement and buy the smallest blank that you can get away with.

All blanks measure 1980mm wide which is wide enough even for the track of supercars such as Porsches, Ferraris and Ultimas (shown pictured). The blank is available in 2 depths; 480mm and 980mm deep. Choose the size you need from the drop-down list above.

Safety Disclaimer

As with any modification to your vehicle, installation of the universal front splitter should be done by a competent installer in compliance with prevailing road safety legislation in your country/region. If in doubt, consult a local vehicle body-shop.

Specification

General Properties
Gross Weight6kg

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Universal Carbon Fibre Front Splitter Kit

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

The packaged size of this product is very large (exceeding 1.8m in length or 1m in width). As a result, shipping to some regions and countries will include a significant oversize surcharge, whilst shipping to some countries is not possible.

Where available, swapping to a smaller variant of this product may avoid this charge.

Delivery Cost

To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.