Need any help or advice?+44 (0)1782 454499
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
Dutch Safety DataSheet | 635 KB | |
Safety Datasheet (SDS) | 568 KB | |
EA700 Epoxy Tooling Board Adhesive TDS | 274 KB |
Colour | Blue | |
---|---|---|
Viscosity | Thixotropic Paste | mPa.s |
Density | 0.80 | g/cm³ |
Pot Life (Typical) | 30 | mins |
Demould Time (Typical) | 24 | hrs |
Coefficient Linear Expansion | 45 | 10-6/K |
---|---|---|
Hardness | 75 (Hard) | Shore D |
Tg Onset (DMA) | 120 | °C |
Gross Weight | 0.6 | kg |
---|
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
EA700 is an epoxy paste adhesive developed to offer easy handling, reliable bonding and matched machining characteristics when bonding together one or more blocks of epoxy tooling board. EA700 can also be used for repairing small chips or areas of damage in tooling board, before or after machining.
AVAILABILITY:More than 10 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
EA700 is an epoxy paste adhesive developed to offer easy handling, reliable bonding and matched machining characteristics when bonding together one or more blocks of epoxy tooling board.
To ensure the minimum possible bond-line witness after machining, EA700 has a similar density and machining behaviour to the board itself, along with similar HDT and CTE, all of which help to ensure almost seamless machining and finishing when producing patterns and moulds from multiple blocks of epoxy tooling board.
Recommended Uses
EA700 epoxy adhesive is ideally suited for bonding of epoxy tooling boards in the density range of 0.5 (500kg/m³) through to 0.9 (900kg/m³). It is especially suited to the bonding of our EB700 Epoxy Tooling Board, having very similar density, thermal behaviour and machining characteristics.
EA700 can also be used to fill gaps and cracks in epoxy tooling board and repair damaged sections or tool path errors prior to or after machining.
EA700 is an epoxy paste adhesive developed to offer easy handling, reliable bonding and matched machining characteristics when bonding together one or more blocks of epoxy tooling board.
To ensure the minimum possible bond-line witness after machining, EA700 has a similar density and machining behaviour to the board itself, along with similar HDT and CTE, all of which help to ensure almost seamless machining and finishing when producing patterns and moulds from multiple blocks of epoxy tooling board.
Recommended Uses
EA700 epoxy adhesive is ideally suited for bonding of epoxy tooling boards in the density range of 0.5 (500kg/m³) through to 0.9 (900kg/m³). It is especially suited to the bonding of our EB700 Epoxy Tooling Board, having very similar density, thermal behaviour and machining characteristics.
EA700 can also be used to fill gaps and cracks in epoxy tooling board and repair damaged sections or tool path errors prior to or after machining.
Colour | Blue | |
---|---|---|
Viscosity | Thixotropic Paste | mPa.s |
Density | 0.80 | g/cm³ |
Pot Life (Typical) | 30 | mins |
Demould Time (Typical) | 24 | hrs |
Coefficient Linear Expansion | 45 | 10-6/K |
---|---|---|
Hardness | 75 (Hard) | Shore D |
Tg Onset (DMA) | 120 | °C |
Gross Weight | 0.6 | kg |
---|
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.