Specification

Weight and Dimensions
Wall Thickness1mm
Length1000mm
Width6mm
Height6mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixEpoxy
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0278kg

Shipping Information

This product is safe for all forms of transport. No restrictions apply.

Simply add the item to your basket and then use the Shipping Calculator on the basket page to find the shipping price for this (and any other items).

6mm (4mm) Carbon Fibre Square Box Section 1000mm

Pultruded carbon fibre box section manufactured using high strength carbon fibre and an epoxy resin matrix for maximum performance. This small, square section profile measures 6mm outside, 4mm inside, leaving a 1mm wall thickness best suited to relatively lightweight applications such as R/C modelling, UAVs, automation and more.

Being a pultrusion, 100% of the fibres run length-ways down the length of the profile, providing maximum stiffness in this direction.

Sold in a 1m length.


AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
£4.05ex. VAT
(£4.05 /M)
More than 100 availablefor immediate shipping
QTY
EACH
EACH

Trade discounts

0-45-1920+
£4.05£3.65£3.35
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Pultruded 6mm carbon fibre box section manufactured from 100% unidirectional carbon fibre.

The box section has an outer width of 6mm and a wall thickness of 1.0mm leaving an inner width of 4mm.

Our micro pultruded 6mm carbon fibre square tubes are only available in 1m (39") lengths.

Typical Uses

This tiny 0.75mm wall thickness box section is recommended for use in UAVs, quad copters/quad rotors, robotics and automation.

Further Information

Pultrusion Explained

Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case box section) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.

Pultruded sections feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. Care should be taken when employing pultruded section to ensure that the fixing points which transfer the load to the section do so in such a way as to minimise any crush forces and distribute the load as much as possible.

Trade discounts

0-45-1920+
£4.05£3.65£3.35
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Pultruded 6mm carbon fibre box section manufactured from 100% unidirectional carbon fibre.

The box section has an outer width of 6mm and a wall thickness of 1.0mm leaving an inner width of 4mm.

Our micro pultruded 6mm carbon fibre square tubes are only available in 1m (39") lengths.

Typical Uses

This tiny 0.75mm wall thickness box section is recommended for use in UAVs, quad copters/quad rotors, robotics and automation.

Further Information

Pultrusion Explained

Pultrusion is a method of manufacturing continuous lengths of fibre reinforced section (in this case box section) by pulling continuous strands of carbon fibre through resin and a former before curing the resin all in one process.

Pultruded sections feature 100% longitudinal fibre orientation which gives them excellent strength along their length but does make them vulnerable to crushing forces. Care should be taken when employing pultruded section to ensure that the fixing points which transfer the load to the section do so in such a way as to minimise any crush forces and distribute the load as much as possible.

Specification

Weight and Dimensions
Wall Thickness1mm
Length1000mm
Width6mm
Height6mm
Product Data
ColourBlack
ConstructionPultrusion
AppearanceUD (Matt)
Resin MatrixEpoxy
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
General Properties
Gross Weight0.0278kg
Can’t find the answer you’re looking for?Ask our technical team a question.

The Box Section surface finish is the natural finish achieved during the pultrusion process which is smooth and has a low level of sheen. The Box Section does not, at this time, come in any other finish.

Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

This box section weighs 28g per meter length.

The 6mm box section has a measured diagonal of 7.6mm.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 6mm (4mm) Carbon Fibre Square Box Section 1000mm

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

This product is safe for all forms of transport. No restrictions apply.

Simply add the item to your basket and then use the Shipping Calculator on the basket page to find the shipping price for this (and any other items).

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.