Need any help or advice?+44 (0)1782 454499
Technical DataSheet (TDS) | 138 KB |
Length | 1000 | mm |
---|---|---|
OD Tolerance (mm) | 0.1 | mm |
Weight per metre | 38 | g |
Colour | Black | |
---|---|---|
Resin Matrix | Epoxy | |
Construction | Pultrusion | |
Appearance | UD (Matt) | |
Tg Onset (DMA) | 80 | °C |
Fibre Orientation | Unidirectional |
---|
Tensile Strength (Lengthways) | 400 - 500 | MPa |
---|---|---|
Tensile Modulus (lengthways) | 28-40 | GPa |
Gross Weight | 0.038 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
High precision pultruded carbon fibre Square rod measuring 5mm square in size. Smaller square rod like this is reasonably easy to bend over longer lengths but offers considerably more stiffness over shorter lengths. Suitable for a range of applications in model-making, radio control, automation, robotics and UAVs, as well as creative uses in art and fashion. The square rod is manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.
The rod is available in 1m and 2m lengths.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
£8.25 | £7.35 | £6.45 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Due to its incredible strength and light weight, carbon fibre rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use is recreational sports equipment, like kites and radio controlled models.
Our carbon fibre rod is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the rods runs laterally along their length.
Typical Uses
Pultruded carbon fibre rods are suitable for use in:
How to Buy
Our rods are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Volume discounts are available for large orders. Please contact us for pricing. We can also supply wholesale quantities to model shops, manufacturers or resellers. Please contact us for more information.
Further Information
Available Diameters
The carbon fibre square rod on this page has a size of 5mm square (0.16"). At Easy Composites we also carry carbon fibre square rods in sizes 4mm (0.02") to 10mm (1/2").
How to Cut and Shape
This carbon fibre rod can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre rod can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Trade discounts
0-4 | 5-19 | 20+ |
---|---|---|
£8.25 | £7.35 | £6.45 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Due to its incredible strength and light weight, carbon fibre rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use is recreational sports equipment, like kites and radio controlled models.
Our carbon fibre rod is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the rods runs laterally along their length.
Typical Uses
Pultruded carbon fibre rods are suitable for use in:
How to Buy
Our rods are available in a 1m or 2m length. Please choose the length you require from the drop-down list.
Volume discounts are available for large orders. Please contact us for pricing. We can also supply wholesale quantities to model shops, manufacturers or resellers. Please contact us for more information.
Further Information
Available Diameters
The carbon fibre square rod on this page has a size of 5mm square (0.16"). At Easy Composites we also carry carbon fibre square rods in sizes 4mm (0.02") to 10mm (1/2").
How to Cut and Shape
This carbon fibre rod can easily be cut and finished using simple workshop tools like a hacksaw and some wet-and-dry paper. Cutting and finishing a carbon fibre rod can also be perfectly safe if you follow some basic safety precautions.
For a comprehensive guide to both safety advice and cutting and finishing techniques watch our video guide to cutting and shaping carbon fibre sheet and carbon fibre parts.
Technical DataSheet (TDS) | 138 KB |
Length | 1000 | mm |
---|---|---|
OD Tolerance (mm) | 0.1 | mm |
Weight per metre | 38 | g |
Colour | Black | |
---|---|---|
Resin Matrix | Epoxy | |
Construction | Pultrusion | |
Appearance | UD (Matt) | |
Tg Onset (DMA) | 80 | °C |
Fibre Orientation | Unidirectional |
---|
Tensile Strength (Lengthways) | 400 - 500 | MPa |
---|---|---|
Tensile Modulus (lengthways) | 28-40 | GPa |
Gross Weight | 0.038 | kg |
---|
Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.
No these pultrusions are not magnetic.
No, this pultrusion is manufactured from standard modulus fibres.
We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts
Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.
Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.
In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.
The HDT of these pultrusions is 80 °C.
Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.