Need any help or advice?+44 (0)1782 454499
Technical Datasheet (TDS) | 199 KB |
Fibre Specifics | E-Glass | |
---|---|---|
Weave | +/- 45 Biaxial |
Thickness | 0.4 | mm |
---|---|---|
Width | 1270 | mm |
Consolidated Thickness | 0.4 | mm |
Areal Weight | 440 | g/m² |
Colour | White | |
---|---|---|
Format | +/- 45 Biaxial | |
Fibre Type | Glass Fibre |
Stabilisation | Internal Net |
---|
Compatible With | Epoxy | Yes |
---|---|---|
Compatible With | Polyester | Yes |
Compatible With | Vinylester | Yes |
Gross Weight | 0.559 | kg |
---|
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Middleweight 440gsm +/-45° biaxial glass reinforcement used to add off-axis stiffness to GRP moulds and components. This multi-axial reinforcement is made up of two layers of non-crimp unidirectional glass fibre, one at +45° and the other at -45° and can be used on its own on more commonly in conjunction with other weights or weaves of reinforcement to create the optimum laminate.
1.27m wide, sold by the linear metre.
AVAILABILITY:More than 100 availablefor immediate shipping
Trade discounts
0-4 | 5-9 | 10-100 | 101+ |
---|---|---|---|
£4.05 | £3.75 | £3.50 | £3.10 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
440gsm biaxial glass reinforcement with a +/- 45° fibre orientation suitable for use in a wide range of glass reinforced composite applications; most commonly boat hulls and vehicle panels but also recreational sports equipment and general GRP manufacturing.
Biaxial glass cloth offers mechanical performance advantages over traditional woven glass cloth (and significant advantages over chopped strand mat) because of straight, flat paths that the glass fibre bundles are stitched into. Unlike a woven cloth where the intersecting weft and warp fibres go over-under-over-under (in the case of a plain weave), biaxial cloth is actually two layers of unidirectional fibre aligned at 90° to each other. Because these unidirectional fibres take a much more direct line (rather than being woven up and down) meaning then when the laminate is stressed the fibres cannot try to 'straighten-out' like they do with a woven cloth, resulting in significant improvements in the tensile strength of the laminate.
Suitable for use with epoxy, polyester and vinylester resin systems. For maximum performance we recommend EL2 Laminating Epoxy.
For a heavier cloth we would recommend our Biaxial Glass Cloth 600g.
How to Buy
This 440g glass biax roll is 1.27m (50") wide and the fabric is sold by the linear metre. The unit price shown is for 1 linear metre but volume discounts automatically apply for larger quantities of fabric.
Please purchase the number of linear metres you require. When purchasing multiple metres the fabric will be supplied in one continuous length on a roll.
Trade discounts
0-4 | 5-9 | 10-100 | 101+ |
---|---|---|---|
£4.05 | £3.75 | £3.50 | £3.10 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
440gsm biaxial glass reinforcement with a +/- 45° fibre orientation suitable for use in a wide range of glass reinforced composite applications; most commonly boat hulls and vehicle panels but also recreational sports equipment and general GRP manufacturing.
Biaxial glass cloth offers mechanical performance advantages over traditional woven glass cloth (and significant advantages over chopped strand mat) because of straight, flat paths that the glass fibre bundles are stitched into. Unlike a woven cloth where the intersecting weft and warp fibres go over-under-over-under (in the case of a plain weave), biaxial cloth is actually two layers of unidirectional fibre aligned at 90° to each other. Because these unidirectional fibres take a much more direct line (rather than being woven up and down) meaning then when the laminate is stressed the fibres cannot try to 'straighten-out' like they do with a woven cloth, resulting in significant improvements in the tensile strength of the laminate.
Suitable for use with epoxy, polyester and vinylester resin systems. For maximum performance we recommend EL2 Laminating Epoxy.
For a heavier cloth we would recommend our Biaxial Glass Cloth 600g.
How to Buy
This 440g glass biax roll is 1.27m (50") wide and the fabric is sold by the linear metre. The unit price shown is for 1 linear metre but volume discounts automatically apply for larger quantities of fabric.
Please purchase the number of linear metres you require. When purchasing multiple metres the fabric will be supplied in one continuous length on a roll.
Technical Datasheet (TDS) | 199 KB |
Fibre Specifics | E-Glass | |
---|---|---|
Weave | +/- 45 Biaxial |
Thickness | 0.4 | mm |
---|---|---|
Width | 1270 | mm |
Consolidated Thickness | 0.4 | mm |
Areal Weight | 440 | g/m² |
Colour | White | |
---|---|---|
Format | +/- 45 Biaxial | |
Fibre Type | Glass Fibre |
Stabilisation | Internal Net |
---|
Compatible With | Epoxy | Yes |
---|---|---|
Compatible With | Polyester | Yes |
Compatible With | Vinylester | Yes |
Gross Weight | 0.559 | kg |
---|
This biaxial glass cloth is 0.4mm thick.
The nominal roll length is 85 linear metres.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2024. All rights reserved.