Downloads (1)

Technical DataSheet (TDS)339 KB

Specification

Weight and Dimensions
Length1000mm
Outside Diameter (OD)0.8mm
Product Data
ColourBlack
Resin MatrixEpoxy
ConstructionPultrusion
AppearanceUD (Matt)
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
OD Tolerance (mm)0.1mm
General Properties
Gross Weight0.001kg

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

0.8mm Carbon Fibre Rod

High precision pultruded carbon fibre rod measuring just 0.8mm in diameter! With such a tiny diameter this rod could be considered to be more of a control wire than a stiff rod and is suited to small scale applications such as radio controlled models. Nonetheless, the rod is still manufactured to tight tolerances using high strength carbon fibre and an epoxy resin matrix for maximum performance.

The rod is available in 1m and 2m lengths.


PRODUCT VERSIONS

Length

AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
£2.55ex. VAT
(£2.55 /M)
More than 100 availablefor immediate shipping
QTY
LENGTHS
LENGTHS

Trade discounts

0-45-1920+
£2.55£2.20£1.90
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Due to its incredible strength and light weight, carbon fibre rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use is recreational sports equipment, like kites and radio controlled models.

Our carbon fibre rod is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the rods runs laterally along their length.

Typical Uses

Pultruded carbon fibre rods are suitable for use in:

  • Radio-Controlled (RC) Planes/Helicopters
  • Unmanned Air Vehicles (UAVs)
  • Stunt/Power Kites
  • Robots
  • Mechanical Control Mechanisms

How to Buy

Our rods are available in a 1m or 2m length. Please choose the length you require from the drop-down list.

Volume discounts are available for large orders. Please contact us for pricing. We can also supply wholesale quantities to model shops, manufacturers or resellers. Please contact us for more information.

Further Information

Available Diameters

The carbon fibre rod on this page has a diameter of 0.8mm (0.03"). At Easy Composites we also carry carbon fibre rods in diameters of 0.5mm (0.02") to 12mm (0.47").

How to Cut and Shape

This very thin 0.8mm carbon fibre rod can simply be cut using a pair of scissors.

Trade discounts

0-45-1920+
£2.55£2.20£1.90
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

PRODUCT VIDEOS(1)

Due to its incredible strength and light weight, carbon fibre rod is used in a wide range of applications including aerospace and motor racing but perhaps its most common use is recreational sports equipment, like kites and radio controlled models.

Our carbon fibre rod is manufactured to engineering tolerances from pultruded unidirectional carbon fibres which means that all the strength of the rods runs laterally along their length.

Typical Uses

Pultruded carbon fibre rods are suitable for use in:

  • Radio-Controlled (RC) Planes/Helicopters
  • Unmanned Air Vehicles (UAVs)
  • Stunt/Power Kites
  • Robots
  • Mechanical Control Mechanisms

How to Buy

Our rods are available in a 1m or 2m length. Please choose the length you require from the drop-down list.

Volume discounts are available for large orders. Please contact us for pricing. We can also supply wholesale quantities to model shops, manufacturers or resellers. Please contact us for more information.

Further Information

Available Diameters

The carbon fibre rod on this page has a diameter of 0.8mm (0.03"). At Easy Composites we also carry carbon fibre rods in diameters of 0.5mm (0.02") to 12mm (0.47").

How to Cut and Shape

This very thin 0.8mm carbon fibre rod can simply be cut using a pair of scissors.

Downloads (1)

Technical DataSheet (TDS)339 KB

Specification

Weight and Dimensions
Length1000mm
Outside Diameter (OD)0.8mm
Product Data
ColourBlack
Resin MatrixEpoxy
ConstructionPultrusion
AppearanceUD (Matt)
Fabric Specification
Fibre OrientationUnidirectional
Mechanical Properties
Tensile Strength (Lengthways)400 - 500MPa
Tensile Modulus (lengthways)28-40GPa
Tg Onset (DMA)80°C
OD Tolerance (mm)0.1mm
General Properties
Gross Weight0.001kg
Can’t find the answer you’re looking for?Ask our technical team a question.

Many people prefer the natural finish of these carbon products, however if you wish to paint them for your specific application then you can do so. A light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

Generally, the pultrusions are used ‘as-is’ and don’t require painting. If you really do need/want to paint the pultrusions then a light key with a fine abrasive paper like a 1200 grit wet and dry paper and a thorough degrease and clean using mild detergent or an alcohol wipe should be all that is needed to prepare the surface for paint.

No these pultrusions are not magnetic.

No, this pultrusion is manufactured from standard modulus fibres.

We do not currently offer a custom cutting service for our tubes and pultrusions. However, they are able to be cut DIY relatively easily as you can see from our tutorial video: How to Cut Carbon Fibre Sheet, Tube and Parts

Unfortunately it is not possible to cut a usable thread into carbon fibre composites. The nature of the material is such that the teeth on a thread would not be able to take any load and would break up either during thread turning or the first attempt at using the thread.

Where it is desirable to have a threaded method of attaching the tube or rod, it is commonplace to fabricate and then bond an aluminium insert into the tube or over the rod end which can then have a thread cut into it.

In simple terms these carbon rods would work with linear bearings in that fashion. The only concern is long term durability as the carbon surface is not quite as hard as aluminium and thus would likely wear quicker in many circumstances. For low usage or low load situations this may well not be a limiting factor.

The HDT of these pultrusions is 80 °C.

Yes absolutely! If done carefully, a hacksaw can be used to cut a pultrusion. Take a look at this VIDEO where we show various methods of cutting carbon fibre.

Although these small diamater rods are flexible enough to be coiled up into hand sized coils, they are unable to take point loadings and as such trying to fold them or bend them around a tight angle corner would cause them to snap.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 0.8mm Carbon Fibre Rod

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

When packaged, this product is over 1m in length. A small additional handling charge will apply when shipping to some countries and regions. When applicable, this handling charge will be included in the automatic shipping calculation shown on the basket page.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer logo
    Staffordshire Chambers of Commerce member Composites UK member

Easy Composites Ltd, registered in England 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.