Downloads (1)

Pyrofil Fibre DataSheet354 KB

Specification

Fabric Specification
Fibre SpecificsPyrofil TR50S 15k
WeaveUnidirectional
Weight and Dimensions
Thickness0.1mm
Width1000mm
Consolidated Thickness0.1mm
Areal Weight100g/m²
Product Data
ColourBlack
FormatUnidirectional
Filament Count15k
Fibre TypeCarbon Fibre
UV StabilityFully UV Stable
BrandMitsubishi
Mechanical Properties
StabilisationInternal Net
Compatible With
Compatible WithEpoxyYes
Compatible WithPolyesterYes
Compatible WithVinylesterYes
General Properties
Gross Weight0.1kg

Shipping Information

This product requires an export licence to be exported outside of the UK.

This product is classified under 'Dual Use' export controls and cannot be exported outside of the UK without an export licence.

Export into the EU, Norway, Switzerland, Lichtenstein, Australia, Japan, USA and Canada

This product can be exported to the EU countries listed above under an Open General Export Licence (OGEL) but due to the additional paperwork required we can only do this for orders of £250 (300 Euro) and above.

Customers will be required to complete an End User Undertaking (EUU) form before the goods can be dispatched.

Export to All Other Countries

For customers outside of the European Union, Norway, Switzerland, Lichtenstein, Australia, Japan, USA and Canada, we cannot ship this product without applying for an Single Individual Export Licence (SIEL). This process can take from 30 to 90 days and requires a lot of documentation and detailed undertakings. For this reason, we strongly recommend that customers outside of the the EU and other countries listed above do not order this product.

If you do still want to order this product, due to the paperwork and admin involved, we can only apply for export licences for orders of £1000 (1200 Euros) and above. Please contact us first to discuss your requirements.

100g Unidirectional Carbon Fibre Cloth (1000mm)

This 100gsm unidirectional dry carbon fibre reinforcement is not stitched or woven but is held together by traces of thermoplastic binder. Unidirectional reinforcement like this is used to add 100% strength in a particular direction and can be used on its own or in conjunction with other reinforcements to acheive the desired strength and behaviour in a structural laminate.

1m wide. Sold by the linear metre.


AVAILABILITY:More than 100 availablefor immediate shipping


PRICE
£15.60ex. VAT
(£15.60 /SQM)
More than 100 availablefor immediate shipping
QTY
LINEAR METRES
LINEAR METRES

Trade discounts

0-45-910-99100+
£15.60£13.00£11.70£9.95
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Ultra-flat, lightweight, 100gsm unidirectional carbon fibre with an invisible internal supporting net.

How to Buy

This unidirectional carbon fibre fabric is 1m wide and sold by the linear metre. Please enter the number of metres you require in the Qty box. Orders for multiple metres will be shipped in one continuous roll, not individual 1m rolls. The unidirectional fibres run longitudinally down the length of the roll.

Trade discounts

0-45-910-99100+
£15.60£13.00£11.70£9.95
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Ultra-flat, lightweight, 100gsm unidirectional carbon fibre with an invisible internal supporting net.

How to Buy

This unidirectional carbon fibre fabric is 1m wide and sold by the linear metre. Please enter the number of metres you require in the Qty box. Orders for multiple metres will be shipped in one continuous roll, not individual 1m rolls. The unidirectional fibres run longitudinally down the length of the roll.

Downloads (1)

Pyrofil Fibre DataSheet354 KB

Specification

Fabric Specification
Fibre SpecificsPyrofil TR50S 15k
WeaveUnidirectional
Weight and Dimensions
Thickness0.1mm
Width1000mm
Consolidated Thickness0.1mm
Areal Weight100g/m²
Product Data
ColourBlack
FormatUnidirectional
Filament Count15k
Fibre TypeCarbon Fibre
UV StabilityFully UV Stable
BrandMitsubishi
Mechanical Properties
StabilisationInternal Net
Compatible With
Compatible WithEpoxyYes
Compatible WithPolyesterYes
Compatible WithVinylesterYes
General Properties
Gross Weight0.1kg
Can’t find the answer you’re looking for?Ask our technical team a question.

There would be zero mechanical properties perpendicular to the fibre orientation because this fibre is 100% unidirectional. All other mechanical properties can be taken from the fibre technical datasheet.

Yes, definately. In fact, wet-layup would probably be the most common way that a unidirectional fibre like this would be laminated. You could also wet-lay then vacuum bag or you could resin infuse although you should be aware that resin infuses slowly through unidirectional fabrics.

For wet-lay lamination you will use approximately the same weight of resin as the weight of the fabric. For example, with a 200gsm cloth, for 1 square metre you will have 200g of fabric and thus will need 200g of resin to wet it out, plus a small amount of wastage for the brush and mixing pot.

'3k' is the filament count or tow size. It simply means that each 'bunch' of carbon fibres that this cloth is woven from is made up of 3000 individual carbon filaments. Bigger counts (6k, 12k etc.) means chunkier 'bunches' of carbon so chunkier fabrics.

Thickness of any reinforcement is dependent on consoldation (how much it's 'squashed down'. For this reason we generally give out thickness figures for when the reiforcement is consoldated under vacuum (1bar); this seems like the most useful figure. For example, a 90gsm carbon, a single layer, compressed under vacuum, would be about 0.1mm thick. For a 200gsm carbon a single layer would be about 0.25mm thick. This is the number you see listed under 'thickness' in the specification table.

You can purchase a sample of our fabrics here.

Well, this depends entirely on what reinforcement you're laminating, speficically how thick and heavy it is. If you're laminating 5mm of carbon fibre you'll use a lot more resin that if you're laminating just 1mm of it. Fortunately though there a really quick rule to get a good estimate - simply add up the total weight of your reinforcement and you'll probably need the same weight in resin. This means that if you're laminating 5 layers of 200g carbon (so a total of 1000g of carbon) then you'll want about 1000g (i.e. 1kg) of Epoxy Resin. If it was 2 layers of 450g glass then you'd need about 900g per square metre.

The carbon fabric itself will survive many hundreds of degrees and is not the limiting factor for almost all applications. The limiting factor will be the heat distortion temperature of the resin system you plan to laminate this fabric with.



An engine rocker/cam cover may easily be exposed to hot oils at around 120°C as well as heat from the exhaust which would be dependent on the engine configuration and level of tune. As such we would recommend considering using a higher temperature resin system such as our Very High Temperature Epoxy Laminating Resin which, with an appropriate post-cure, can be used up to 180°C.



An alternative option would be to consider making the part with an out of autoclave pre-preg carbon fibre where typically the resin systems can achieve a HDT up to 120°C.

For very critical applications, such as aerospace, even dry carbon fabrics will be 'lifed' due to very gradual degradation of the sizing on the fibres, however in practice, for most applications, the degradation is minimal and most users would consider dry fabrics to not have a shelf life when stored appropriately.

All Carbon fibres are naturally charcoal black in colour.

Yes, the TR50S fibre is sized for general composites use (i.e. for thermoset resin systems).

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for 100g Unidirectional Carbon Fibre Cloth (1000mm)

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

This product requires an export licence to be exported outside of the UK.

This product is classified under 'Dual Use' export controls and cannot be exported outside of the UK without an export licence.

Export into the EU, Norway, Switzerland, Lichtenstein, Australia, Japan, USA and Canada

This product can be exported to the EU countries listed above under an Open General Export Licence (OGEL) but due to the additional paperwork required we can only do this for orders of £250 (300 Euro) and above.

Customers will be required to complete an End User Undertaking (EUU) form before the goods can be dispatched.

Export to All Other Countries

For customers outside of the European Union, Norway, Switzerland, Lichtenstein, Australia, Japan, USA and Canada, we cannot ship this product without applying for an Single Individual Export Licence (SIEL). This process can take from 30 to 90 days and requires a lot of documentation and detailed undertakings. For this reason, we strongly recommend that customers outside of the the EU and other countries listed above do not order this product.

If you do still want to order this product, due to the paperwork and admin involved, we can only apply for export licences for orders of £1000 (1200 Euros) and above. Please contact us first to discuss your requirements.

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.